Third Generation F-Body Message Boards

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)
-   Engine/Drivetrain/Suspension Parts for Sale (https://www.thirdgen.org/forums/engine-drivetrain-suspension-parts/)
-   -   motown efi intake new (https://www.thirdgen.org/forums/engine-drivetrain-suspension-parts/722586-motown-efi-intake-new.html)

Ronny 07-29-2015 01:21 PM
motown efi intake new
 
see earlier post. this is another photo.
https://cimg6.ibsrv.net/gimg/www.thi...c1b458fd87.jpg

Ronny 08-04-2015 06:52 PM
Re: motown efi intake new
 
great deal

Ronny 08-31-2015 08:23 AM
Re: motown efi intake new
 
still available

Ronny 10-20-2015 05:08 PM
Re: motown efi intake new
 
$170 + ship

anesthes 10-24-2015 05:25 PM
Re: motown efi intake new
 
Originally Posted by Ronny (Post 5972927)
$170 + ship
1205 or 1206

Ronny 10-25-2015 03:09 PM
Re: motown efi intake new
 
I suspect the larger of the two. That is a 1206. Right? There is a thread on the Motown that may answer as well. I will measure ports later tonight. I also have a Holley TBI manifold to compare to just for fun. May be a part # on the Motown casting.

anesthes 10-25-2015 05:28 PM
Re: motown efi intake new
 
Originally Posted by Ronny (Post 5974335)
I suspect the larger of the two. That is a 1206. Right? There is a thread on the Motown that may answer as well. I will measure ports later tonight. I also have a Holley TBI manifold to compare to just for fun. May be a part # on the Motown casting.
Let me know.

-- Joe

Ronny 10-25-2015 08:17 PM
Re: motown efi intake new
 
Port 2.02 x 1.18

In bold print casting #061040. On bottom of intake 070010

Ronny 10-25-2015 08:19 PM
Re: motown efi intake new
 
http://www.speedwaymotors.com/World-...fold,8599.html

anesthes 10-26-2015 06:28 AM
Re: motown efi intake new
 
Originally Posted by Ronny (Post 5974425)
Did you measure? I dunno if the non efi one is slightly different. Funny how speedway is trying to get $324 for them when everyone else was selling em for $199 last year before stock dried up.

I'm gonna see if the fuel rail mounts are still available. I didn't realize these were discontinued.

-- Joe

Ronny 10-26-2015 08:59 AM
Re: motown efi intake new
 
Measure? I measured the port size. See #8.

It was said that the Chinese ones on ebay are a good choice. I bought the edelbrock for use on this manifold. There were close enough to use but were off a tad. I used on my Edel Vic-E SP. Fit perfectly are one would expect. I would suggest using Chinese. Also Accel tech they have some used/never sold ones lying around. Accel=Motown. They may be perfect fit?

anesthes 10-26-2015 09:51 AM
Re: motown efi intake new
 
Originally Posted by Ronny (Post 5974531)
Measure? I measured the port size. See #8.

It was said that the Chinese ones on ebay are a good choice. I bought the edelbrock for use on this manifold. There were close enough to use but were off a tad. I used on my Edel Vic-E SP. Fit perfectly are one would expect. I would suggest using Chinese. Also Accel tech they have some used/never sold ones lying around. Accel=Motown. They may be perfect fit?
I have rails, but see how the threaded holes are in the bottom? Most rails bolt horizontally. The motown has these special rail mounts made of aluminum.


https://cimg3.ibsrv.net/gimg/www.thi...40e9dda9be.jpg

Did did edelbrock clips fit ?

-- Joe

Ronny 12-04-2015 08:26 AM
Re: motown efi intake new
 
SOLD


All times are GMT -5. The time now is 05:33 AM.


© 2024 MH Sub I, LLC dba Internet Brands