B&B SBC Drag Race Oil Pan B&B SBC Drag Race Oil Pan 2-Piece Rear main -10AN fittings for turbo oil drain. Can cap if not needed. Gloss black powder coat Comes with new oil pickup and bolts Used for 1 season $190obo plus shipping and paypal fees https://picload.org/image/dricrgpr/img_7797.jpg https://picload.org/image/dricrgpa/img_7798.jpg https://picload.org/image/dricrgpl/img_7799.jpg https://picload.org/image/dricrgpi/img_7800.jpg https://picload.org/image/dricrgpw/img_7801.jpg https://picload.org/image/dricrgwr/img_7802.jpg |
Re: B&B SBC Drag Race Oil Pan . |
Re: B&B SBC Drag Race Oil Pan bump |
Re: B&B SBC Drag Race Oil Pan bump |
Re: B&B SBC Drag Race Oil Pan bump |
Re: B&B SBC Drag Race Oil Pan What part # is this pan? Will it definitely fit stock K member? |
Re: B&B SBC Drag Race Oil Pan The part number 91088. Not sure if it will fit the stock k-member. The sump is 10.5" long by 7.75" wide. The sump starts about 10.5" back from the front of the engine. You should be able to measure to see if it'll fit. I used it in a s-10 that I had already modified the cross member while I had the engine out. It may have fit without modifying the cross member, but would have been close. |
Re: B&B SBC Drag Race Oil Pan Thanks for the dimensions, I'll have to do some measuring. How deep is the sump and how deep is the frt. section? |
Re: B&B SBC Drag Race Oil Pan 4.5" at the front and 8" at the back |
Re: B&B SBC Drag Race Oil Pan bump |
All times are GMT -5. The time now is 05:39 AM. |
© 2024 MH Sub I, LLC dba Internet Brands