Dougs Full Length Headers w BMR K member
 

I have a set of dougs full length headers on the car now with the stock k member. I had to dimple (pretty bad) the passenger side header to get it to fit around where the lower a arm bolts to the k member. Was just wondering if the BMR k member will give me more room.

Re: Dougs Full Length Headers w BMR K member
 

wow

Re: Dougs Full Length Headers w BMR K member
 

holy crap, they are pretty much trash now.

maybe should have asked about the k-member before the hammer?

Re: Dougs Full Length Headers w BMR K member
 

Nice paper weight!

Re: Dougs Full Length Headers w BMR K member
 

wow, u really thrashed those headers, my dougs longtubes on my stock k member fit fine, although the engine is out of the car right now so i cant show any pics, but u must have a tweaked frame or something.plus that last tube is a slip tube, you should of not welded it. you see the cut on the flange you are suppose to cut all the way through, i know they dont cut them all the way when u buy them. you really should buy a new set of headers, cause you just wasted them.

Re: Dougs Full Length Headers w BMR K member
 

So whats the answer to my question, my headers are fine I have a welder. Thanks for the feedback. Slip tube or no tube they still didnt fit. My 84 must be different from the newer ones, I drove my friends yea they just felt different.

Re: Dougs Full Length Headers w BMR K member
 

Maybe my Brodix aluminum race rite heads are making them not fit. What kind of starter are you using with dougs full length.

Re: Dougs Full Length Headers w BMR K member
 

well, the dougs identical to hooker 2210 except they have thicker flanges. i know those dougs will fit in any year 82-92 camaro or firebird. i pretty sure there is someone on this site that has those heads and those headers. you really should take advantage of the slip tube, cause if you do u can install those headers with only three tube then install the 4th tube. you wont be able to install those headers unless u crush the tube like you did without removing the slip tube.

Re: Dougs Full Length Headers w BMR K member
 

So how much more you do you get with the k member.

Re: Dougs Full Length Headers w BMR K member
 

You can always modify the stock k-member

Attachment 415626

Attachment 415627

Attachment 415628

Attachment 415629

Attachment 415630

Attachment 415631

Attachment 415632

i had to cut and modify about 5 to 7 peaces on
the k-member and a-arm ears to keep my header primaries from looking like yours hahaha.