PARTING OUT 1991 CAMARO Z28 g92 CAR *** TEXAS 5.0L 5-speed LOTs of new parts, Engine was rebuilt 20k ago and just lost a piston. TPI (Speed Density) Complete Intake, Plenum, TB, Southbay Injector Bosch 3 injectors for 305, all sensors, new regulator diaphragm, K&N Filter, fuel rail etc. $300 Hei Distributor (O'reilys remaned) and MSD Coil (500 miles) $100 World Class T-5, Flywheel, Centerforce Dual Friction Clutch, throwout bearing, Poly-urethane Transmission Mount and Slave Cylinder (2000 miles on clutch kit and flywheel) Does not grind. $600 Borg Warner 9 Bolt G92 rear end with 3.42 posi and rear disc brakes with upgraded slotted 11" rotors $400 Front Steering (Inner and outer tie rods center link, idler arm and tight steering box (2000 miles on all but box) $150 Serpentine Set up: Includes Both mounting brackets, Tenstioner, Alternator (Tested) Water pump (2000 miles) Working A/C compressor and all pulleys. $200 58cc 305 Tpi Heads with 20K miles, Include chrome center bolt valve covers, and K&N Breathers $160 ECU and engine wiring harness $170 Wiring Harnesses (Message me what you need) Factory Radiator -$75 Dual Electric Cooling Fan Assembly -$75 Exhaust manifolds (Air injector holes capped with Brass fittings) $50 pr Master Cylinder and brake Booster, will include Factory rear disc brake proportioning valve $100 KYB Struts and Shocks (2000 miles) $100 Fuel Tank with newer Fuel pump $100 Transmission Crossmember $85 Front Disc Brake kit (10" rotors, single piston calipers, pads, hardware, lines, bearings etc) Parts have 2000 miles on them $140 BODY: Front Bumper Cover $140 Bumper GFX $150 Grille $20 GFX (message me what peice you need) Headlight panel with all new bulbs $50 Fenders $75 Z28 hood blisters $130 pr. Bolt on 2" Cowl Induction hood $300 Rear Bumper cover $100 Door Mirrors (electric Remote) $75 pr FOG lights $150 pr. Power Window regulators (Work great and fast) $70 each Doors w/hinges (No Regulator, panel, gfx or windows) Rear HIGH rise Spoiler with hardware $200 Grid style Rear Tail lamp assemblys with TINTED LENSES $100 pr. Rear Hatch and Glass (3rd Brake light) $175 Rear Hatch Struts $20 each Hood Hinges $25 each C&C Glass T-tops with original bags and key for locks $400 C&C T-top weather stripping (Used but in Very good condition) $100 Side glass windows $45 ea Front windshield $100 INTERIOR: Re Upholstered T-top headliner, speaker covers and visors $150 Dash with Yellow Z28 emblem (Bare ) $120 Z28 Cluster (Tach not accurate) 124K miles $85 Center Console $100 Clutch, Brake and Gas pedals $100 Airbag and Steering wheel $40 Split fold down rear seats (No rips or tears) Door Panels $75 Arm Rests $20 Manual passenger seat (Good condition) $50 Electric Drivers Seat (has bolster wear) $60 Dome light w/ Lens $20 Fog light switch $20 Rear View Mirror with map lights $25 Carpet Ft. and Rear (is dated but should clean up nicly) $75 Grey interior plastics (message me what part you need) Feel Free to make offers on any of the parts listed. You pay shipping, I will ship larger items frieght but prefer Pick up. MESSAGE ME with any other Parts requests. Will also sell rear quaters, t-bar, and floor board sections once dissassembled |
Re: PARTING OUT 1991 CAMARO Z28 g92 CAR *** TEXAS 5.0L 5-speed bump |
Re: PARTING OUT 1991 CAMARO Z28 g92 CAR *** TEXAS 5.0L 5-speed would you sell the AC acc bracket alone? |
Re: PARTING OUT 1991 CAMARO Z28 g92 CAR *** TEXAS 5.0L 5-speed
Originally Posted by DarrensCamaro
(Post 5539476)
would you sell the AC acc bracket alone? |
Re: PARTING OUT 1991 CAMARO Z28 g92 CAR *** TEXAS 5.0L 5-speed Would love front and rear seat, Front brakes and all that goes with them, and the 3.42 gear disk rear end. Freight would kill me though. Would buy whole car but again freight would suck. Other than engine letting go what wrong with car for you to want to part it? Looks to be solid how many mile on chassis? |
Re: PARTING OUT 1991 CAMARO Z28 g92 CAR *** TEXAS 5.0L 5-speed
Originally Posted by Benc1
(Post 5539682)
Would love front and rear seat, Front brakes and all that goes with them, and the 3.42 gear disk rear end. Freight would kill me though. Would buy whole car but again freight would suck. Other than engine letting go what wrong with car for you to want to part it? Looks to be solid how many mile on chassis? |
Re: PARTING OUT 1991 CAMARO Z28 g92 CAR *** TEXAS 5.0L 5-speed The right and left side GFX? |
Re: PARTING OUT 1991 CAMARO Z28 g92 CAR *** TEXAS 5.0L 5-speed Would you sell whole car if so what would it cost |
Re: PARTING OUT 1991 CAMARO Z28 g92 CAR *** TEXAS 5.0L 5-speed Ill do 100 shipped for the blisters.. cash in hand |
Re: PARTING OUT 1991 CAMARO Z28 g92 CAR *** TEXAS 5.0L 5-speed Never mind way to much to transport. I need door sill plates if both in good condition, both kick panels, interested in msd coil if you will separate from distributor, and throttle body if you will separate from tpi stuff. |
Re: PARTING OUT 1991 CAMARO Z28 g92 CAR *** TEXAS 5.0L 5-speed
Originally Posted by Benc1
(Post 5539716)
Never mind way to much to transport. I need door sill plates if both in good condition, both kick panels, interested in msd coil if you will separate from distributor, and throttle body if you will separate from tpi stuff. Door Sill plates $50 pr. MSD coil $40 Throttlebody (has new TPS) $100 |
Re: PARTING OUT 1991 CAMARO Z28 g92 CAR *** TEXAS 5.0L 5-speed
Originally Posted by TheSumOfOne
(Post 5539837)
Only have Passenger Kick Panel Door Sill plates $50 pr. MSD coil $40 Throttlebody (has new TPS) $100 Could buy coil new from hawks at 45 and change. Pass on the throttle body. |
Re: PARTING OUT 1991 CAMARO Z28 g92 CAR *** TEXAS 5.0L 5-speed $120.00 shipped to 74029 for hood blisters. Cash in hand. |
Re: PARTING OUT 1991 CAMARO Z28 g92 CAR *** TEXAS 5.0L 5-speed how much for the whole 5 speed swap? ( Trans, drive shaft, crossmember, shifter, pedal, cylinders and clutch |
Re: PARTING OUT 1991 CAMARO Z28 g92 CAR *** TEXAS 5.0L 5-speed How are door panels & arm rests? Can you post better pics? |
Re: PARTING OUT 1991 CAMARO Z28 g92 CAR *** TEXAS 5.0L 5-speed i need the outer door gfx how much for both or just the drivers to 11419 thanks |
Re: PARTING OUT 1991 CAMARO Z28 g92 CAR *** TEXAS 5.0L 5-speed Bump |
Re: PARTING OUT 1991 CAMARO Z28 g92 CAR *** TEXAS 5.0L 5-speed bump... |
Re: PARTING OUT 1991 CAMARO Z28 g92 CAR *** TEXAS 5.0L 5-speed
Originally Posted by TheSumOfOne
(Post 5544106)
bump... |
Re: PARTING OUT 1991 CAMARO Z28 g92 CAR *** TEXAS 5.0L 5-speed Is the steering wheel leather? How is the airbag upper corners and face? Also would you be willing to sell the metal piece only from the hatch? I don't need the glass or the spoiler? |
Re: PARTING OUT 1991 CAMARO Z28 g92 CAR *** TEXAS 5.0L 5-speed I call for the rear end! |
Re: PARTING OUT 1991 CAMARO Z28 g92 CAR *** TEXAS 5.0L 5-speed I'd like to know more bout the serpentine belt conversion and the shocks and struts and the cooling fans and the distributor/coil set any type of deal you can make me I'm up in perryton thanks |
Re: PARTING OUT 1991 CAMARO Z28 g92 CAR *** TEXAS 5.0L 5-speed Oh and what about the exhaust from the headers back is that up for sale? |
Re: PARTING OUT 1991 CAMARO Z28 g92 CAR *** TEXAS 5.0L 5-speed shifter plate, clutch pedal assembly w/ connectors shipped to 88240..ready to buy via paypal |
Re: PARTING OUT 1991 CAMARO Z28 g92 CAR *** TEXAS 5.0L 5-speed What MPH speedo is in the dash? Approx weight for the a/c and brackets for shipping to ga? |
Re: PARTING OUT 1991 CAMARO Z28 g92 CAR *** TEXAS 5.0L 5-speed
Originally Posted by scottyroc
(Post 5547449)
Is the steering wheel leather? How is the airbag upper corners and face? Also would you be willing to sell the metal piece only from the hatch? I don't need the glass or the spoiler? |
Re: PARTING OUT 1991 CAMARO Z28 g92 CAR *** TEXAS 5.0L 5-speed im in dfw im intrested in the condition of the headliner board if good i can meet you some where im intrested at 100 cash tho dont need the sail panels just the visiors and headliner |
Re: PARTING OUT 1991 CAMARO Z28 g92 CAR *** TEXAS 5.0L 5-speed Plastic front ashtray? |
Re: PARTING OUT 1991 CAMARO Z28 g92 CAR *** TEXAS 5.0L 5-speed hi im interested in the shell if you selling, need to take metal and transfer to mine due to rust. :( Would you be able to send pictures of your car thanks. |
Re: PARTING OUT 1991 CAMARO Z28 g92 CAR *** TEXAS 5.0L 5-speed Need Front GFX for zip code 20653 |
Re: PARTING OUT 1991 CAMARO Z28 g92 CAR *** TEXAS 5.0L 5-speed have you sold the fuel pump? |
Re: PARTING OUT 1991 CAMARO Z28 g92 CAR *** TEXAS 5.0L 5-speed I am looking for a wiper motor if you can confirm that it was a delay type motor and all functions worked properly before being removed. If so, I can make an offer on it. Let me know. :) Thanks. |
Re: PARTING OUT 1991 CAMARO Z28 g92 CAR *** TEXAS 5.0L 5-speed Will the spacer for the passenger side exhaust manifold be included? |
Re: PARTING OUT 1991 CAMARO Z28 g92 CAR *** TEXAS 5.0L 5-speed Pics of the steering wheel? Is it a leather wheel? |
Re: PARTING OUT 1991 CAMARO Z28 g92 CAR *** TEXAS 5.0L 5-speed Interested in the fuel tank with pump. Pm me if still avail. |
Re: PARTING OUT 1991 CAMARO Z28 g92 CAR *** TEXAS 5.0L 5-speed is the grille still available? |
Re: PARTING OUT 1991 CAMARO Z28 g92 CAR *** TEXAS 5.0L 5-speed Is the serpentine stuff still available? |
Re: PARTING OUT 1991 CAMARO Z28 g92 CAR *** TEXAS 5.0L 5-speed Still have anything? I'll pm with what i'm looking for. |
All times are GMT -5. The time now is 07:54 PM. |
© 2024 MH Sub I, LLC dba Internet Brands