Third Generation F-Body Message Boards

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)

- Fabrication (https://www.thirdgen.org/forums/fabrication/)

- - Door/Dash lit Emblem (https://www.thirdgen.org/forums/fabrication/754047-door-dash-lit-emblem.html)

TireSmokin'

06-19-2018 05:16 PM

Door/Dash lit Emblem

1 Attachment(s)

This is similar to the door and dash emblem we did. The set we did for the Camaro was red and has an even lighting. This has a hot spot since I just rigged up a quick light to get a decent representation.
We are going to make a set for ground FX. I'm also going to make a tight trim piece, so mostly just the Z28 is lit without the border being lit also.

We will make a small run of these for some local guys.

Attachment 459447

mmadden55

06-19-2018 05:23 PM

Re: Door/Dash lit Emblem

picture didn't come through

TireSmokin'

06-20-2018 02:14 PM

Re: Door/Dash lit Emblem

2 Attachment(s)

I made a tighter fitting trim piece.
I have three local guys getting these so far. One is going in a second gen gas door.

Attachment 459445

Attachment 459446

.

TireSmokin'

06-23-2018 11:00 AM

Re: Door/Dash lit Emblem

I've been talking with several of the car guys around here, and they are requesting these, along with other emblems scaled to approx. 3', to hang in their garages.
I've done the Chevy SS for the Chevelle's, a Nova, and a Corvette.
One is ready for the Cobra, and the SRT Hellcat and Demon.

All times are GMT -5. The time now is 09:34 PM.