hawks fiberglass iroc hood !! Got off the phone with Steven at Hawks third gen earlier this morning he explain to me if I could get 10 members total they would start producing fiberglass iroc hoods just need 9 more members to complete this and get the ball rolling come on guys I know some of u have been wanting this for awhile ...the hood will accept stock hinges latch.ect. who's in? |
Re: hawks fiberglass iroc hood !! If it stays uynder $500 I'm down for sure! |
Re: hawks fiberglass iroc hood !!
Originally Posted by Johnny Blaze
(Post 5519080)
If it stays uynder $500 I'm down for sure! |
Re: hawks fiberglass iroc hood !!
Originally Posted by DrNBody
(Post 5519211)
$300 I'm in The original post said they would be about $480. I'd love to get one for $300, heck I'd order 2 at that price, but considering even the garbage hoods from up22 cost atleast that, I doubt hawks will get a quality hood for $300. But again, if they do, put me down for 2, so we would be that much closer! |
Re: hawks fiberglass iroc hood !! I'm intrtsd |
Re: hawks fiberglass iroc hood !! I'm in !!! I can pay half now. |
Re: hawks fiberglass iroc hood !! Man, I wish we could get a few more people on board. |
Re: hawks fiberglass iroc hood !! I am looking a hood and will buy today for under $500 |
Re: hawks fiberglass iroc hood !! Looks like we are about half way there! |
Re: hawks fiberglass iroc hood !! Who makes the hood? What kind of quality is it? |
Re: hawks fiberglass iroc hood !! Guess this won't be happening :( |
Re: hawks fiberglass iroc hood !!
Originally Posted by Johnny Blaze
(Post 5552114)
Guess this won't be happening :( Heather 864-915-4637 heather@hawksthirdgenparts.com ALSO, LET ME KNOW IF I CAN HELP YOU ALL WITH ANY OTHER PARTS!! |
Re: hawks fiberglass iroc hood !! BUMP |
Re: hawks fiberglass iroc hood !! I wanttttt |
Re: hawks fiberglass iroc hood !! I'm in |
Re: hawks fiberglass iroc hood !!
Originally Posted by Johnny Blaze
(Post 5519080)
If it stays uynder $500 I'm down for sure! |
Re: hawks fiberglass iroc hood !! Looks like we are getting close! |
Re: hawks fiberglass iroc hood !! I am in!! I am curious to know who will be making these hoods. How many is that? |
Re: hawks fiberglass iroc hood !! Curious if anyone else is still interested. |
Re: hawks fiberglass iroc hood !! Think if you guys (hawks third gen) put a message on your site about possibly selling stock factory Iroc hoods you could get the 10 orders you're looking for? |
Re: hawks fiberglass iroc hood !! Would like a price....depending on that. |
Re: hawks fiberglass iroc hood !! I'd be up for one too..(: |
Re: hawks fiberglass iroc hood !! Is this the hood you all are asking about? http://www.hawksthirdgenparts.com/pr...w-or-Used.html Let me know, Heather heather@hawksthirdgenparts.com 864-915-4637 |
Re: hawks fiberglass iroc hood !! Yes, the IROC hood, only in fiberglass. |
I bought a ram air 2 good from hawks about a year ago and it is problem the worst fitting hood I've ever seen on a car ... Definitely not worth what I paid for it .. Wish I would just put a stock hood back on it |
Re: hawks fiberglass iroc hood !! I also bought one and the fit isnt that great. It sticks up in the front and the rear. But, I like it better than the stock one. |
Re: hawks fiberglass iroc hood !! Fiberglass hoods never fit as well as a stock hood without work. Regardless, I want a fiberglass iroc hood. |
Re: hawks fiberglass iroc hood !! I have been looking for a fiberglass Z28 hood, any word if this is going to happen? |
Re: hawks fiberglass iroc hood !!
Originally Posted by ScottyRock
(Post 5695447)
I have been looking for a fiberglass Z28 hood, any word if this is going to happen? |
Re: hawks fiberglass iroc hood !! bringing this thread back... I will never understand why this kind of stuff is so poorly advertised. I didn't find out about the carbon fiber IROC hoods until the guy stopped making them. Now I catch this thread just before it dies... what's the status of this? who is making the hood? will it take the factory louvers? I'm in |
Re: hawks fiberglass iroc hood !! Sorry to post again, I just think that it's beyond stupid that I can find a fiberglass SS, Cowl, Daytona and even a turbo hood. I think I've seen a fiberglass RS hood. Why is it that nobody thinks it would be worthwhile to make a regular-ole IROC-Z hood but they will make all of the above crap? |
Re: hawks fiberglass iroc hood !! I'd still buy one. |
Re: hawks fiberglass iroc hood !! Hi, There is a ton of work that goes into the production of a new hood, with that said if we can get 10 people to give a deposit of 250.00 with a retail cost of around 550.00 Plus shipping there will be around a 8-10 week lead time to get these produced, varified and stock coming to the shelf. With that being said we will help you guys if the need is there . I hope this helps you and thanks for the opportunity!. Thanks, Bruce www.hawksthirdgenparts.com |
Re: hawks fiberglass iroc hood !!
Originally Posted by hawksthirdgen
(Post 5718361)
Hi, There is a ton of work that goes into the production of a new hood, with that said if we can get 10 people to give a deposit of 250.00 with a retail cost of around 550.00 Plus shipping there will be around a 8-10 week lead time to get these produced, varified and stock coming to the shelf. With that being said we will help you guys if the need is there . I hope this helps you and thanks for the opportunity!. Thanks, Bruce www.hawksthirdgenparts.com I still think it's ridiculous that there is a market to produce everything EXCEPT the stock IROC hood w/ louvers. |
Re: hawks fiberglass iroc hood !!
Originally Posted by blakecharles
(Post 5718652)
Bruce, I want this hood... How are you collecting deposits? I still think it's ridiculous that there is a market to produce everything EXCEPT the stock IROC hood w/ louvers. Call me at the shop , only speak with me as the sales staff is unaware of the product . I will discuss further over the phone! Thanks,Bruce |
Re: hawks fiberglass iroc hood !! I wouldn't mind their Turbo/Daytona one, but again I have heard so many people complain that they don't fit and they end up throwing a boat load of bondo + sanding + refitting to get these to even fit on an IROC. Makes me very hesitant to spend that much money only to have to spend that much again to make it look right. |
Re: hawks fiberglass iroc hood !! They need 10 orders to pay for the mold making, how it always goes. takes about 10 to start any project. Then after that its worth doing, and a good mold will make many hoods. |
Re: hawks fiberglass iroc hood !! My Daytona Hood from Hawks fitment was a bit skinny, sat high over the fenders and had a lip about 1/2" thick on the front. I added spacers to the hood latch bar and trimmed the front lip down to fit close to center while not pushing so much on the front bumper when latched. The sides show a bit of the fender bumpers and sit very tightly on/inbetween them. I have the car at the shop now, and am hoping they could get it to fit a bit better than when me and a buddy (body man) tried. He basically told me if we could get the fenders pushed in a tad bit more, the hood would sit very close to flush, side to side, but still would need work to sit lower so as not to show the side lip of the hood when looking from the side of the car. Overall, a little sanding, grinding and I'm sure it's not super smooth so smooth it more and it'll look great. This being an IROC reproduction, I'm thinking there won't be as many problems. Hopefully with the feedback and group buy, you guys may get a high quality run going here. Good luck. I love group buys. Stinks Klearz couldn't stick with mine. |
Re: hawks fiberglass iroc hood !! I was lucky enough to buy a fiberglass from this guy in Canada was the very last one had. Was a pain to import the hood but one of the only few people in the country with a real fiberglass 85-92 iroc hood. Weighs 28lbs |
Originally Posted by 90-irocdx3
(Post 5776473)
I was lucky enough to buy a fiberglass from this guy in Canada was the very last one had. Was a pain to import the hood but one of the only few people in the country with a real fiberglass 85-92 iroc hood. Weighs 28lbs 91' bird 305 TBI T-5, trick flow 175 cc heads, 4.10 gears, lots of suspension upgrades. 24mpg @ 2500rpm hwy. 8.80@ 84mph 1/8th on street tires... 8.000's soon |
I believe my dad still has a factory iroc fiberglass hood with the small factory air scoop in the middle 91' bird 305 TBI T-5, trick flow 175 cc heads, 4.10 gears, lots of suspension upgrades. 24mpg @ 2500rpm hwy. 8.80@ 84mph 1/8th on street tires... 8.000's soon |
Re: hawks fiberglass iroc hood !! This is not about the early 'functional' z28 hood. This is about getting a fiberglass hood that accepts factory IROC Z louvers, a hood of which I have never seen made. |
Re: hawks fiberglass iroc hood !!
Originally Posted by 90-irocdx3
(Post 5776473)
I was lucky enough to buy a fiberglass from this guy in Canada was the very last one had. Was a pain to import the hood but one of the only few people in the country with a real fiberglass 85-92 iroc hood. Weighs 28lbs You got pics? Who made the hood? |
Re: hawks fiberglass iroc hood !! 1 Attachment(s) The guy who made the hood is no longer making them, he no longer has the mold either. The hood is going to wrapped in carbon vinyl. Attachment 334983 |
Re: hawks fiberglass iroc hood !! I believe he only made five of these hoods too. |
Re: hawks fiberglass iroc hood !! Can we bring this back to life please !! Do aggregated that no one makes the stock iroc hood in fiberglass.. Let's go Hawksthirdgen get it done people will buy! |
Re: hawks fiberglass iroc hood !! Hawks is waiting for 10 people to commit. In 2 years time this has not happened. This has shown them that there is not a real demand for this product. I would still be in, but my 3rd gen is gone. |
Re: hawks fiberglass iroc hood !! Yea problem is who wants to put down money on a product that might come out like garbage ... Hawks needs to just produce the thing cause people are weary of putting money down on a product that has yet to prove itself... |
Re: hawks fiberglass iroc hood !! They make plenty of money to try and produce the product .. Especially the way they rape you for shipping anything |
Re: hawks fiberglass iroc hood !! Its a bunch of money to invest in molds and make a product, when you don't even know there is a demand. They offered it out, and got very little response, thus showing the demand does not meet the investment. There's a saying "Put up or shut up" I had no problems offering money for one, but I sold the car. When you order a fiberglass part from any company, that part is made after your order, from molds they already have. I ordered a hood from VFN last year. The hood was made after I ordered. That's the way fiberglass companies work. Hawks has offered to invest in creating molds for a low demand product. The demand has proven to be so low the investment is not a wise move to make as far as the business is concerned. You can always call other companies and see what they would do to get you a hood. |
All times are GMT -5. The time now is 03:26 AM. |
© 2024 MH Sub I, LLC dba Internet Brands