Parting 92 RS black interior 5 speed Finally got into tearing it down. T5 setup is tentatively spoken for by a member on here. Black front buckles, with marks, but no cracks. Seat belts all work. The console vinyl pad is not cracked. Nice sail panels, not cracked shift plate- white logo, good working heater controls, drivers sill is not cracked, I believe I have passenger uncracked. Let me know what you need. I will be heading to TX in the AM, and will be back Sunday. Will pop in to answer questions as much as possible. |
Re: Parting 92 RS black interior 5 speed Are both front seat belts for a coupe? Also, do you have any pictures? |
Re: Parting 92 RS black interior 5 speed Any change I could buy the clutch firewall doubler plate? This is a piece of sheet metal welded to the inside of the car where the clutch master is bolted. The doubler ring for the shifter boot would be nice to have too, if that is available. |
Re: Parting 92 RS black interior 5 speed 7 Attachment(s) Yes the belts are for a coupe. |
Re: Parting 92 RS black interior 5 speed
Originally Posted by scooter
(Post 6251982)
Any change I could buy the clutch firewall doubler plate? This is a piece of sheet metal welded to the inside of the car where the clutch master is bolted. The doubler ring for the shifter boot would be nice to have too, if that is available. |
Re: Parting 92 RS black interior 5 speed
Originally Posted by beths91camaro
(Post 6252886)
Yes, we can get that out. No doubt I need to pull the dash shell. And not sure what you are talking about with doubler ring. The 5 speed shifter has a plate/ring welded to the tunnel for the shifter boot. You'll see that when you pull the boot off and the trans out, it is welded to the underside of the hump |
Re: Parting 92 RS black interior 5 speed
Originally Posted by scooter
(Post 6252987)
You can cut the doubler on the firewall fairly easy, even without pull the dash carrier. The 5 speed shifter has a plate/ring welded to the tunnel for the shifter boot. You'll see that when you pull the boot off and the trans out, it is welded to the underside of the hump |
Re: Parting 92 RS black interior 5 speed
Originally Posted by beths91camaro
(Post 6253002)
I will see if that is good- tunnel was damaged in this car. |
Re: Parting 92 RS black interior 5 speed pics both sides of sail panels please/thank you |
Re: Parting 92 RS black interior 5 speed 2 Attachment(s)
Originally Posted by Lakerman62
(Post 6253020)
pics both sides of sail panels please/thank you |
Re: Parting 92 RS black interior 5 speed please send price/shipping to 97080....send me PM w/paypal address,thanks 4 such a quick response............. |
Re: Parting 92 RS black interior 5 speed 1 Attachment(s)
Originally Posted by scooter
(Post 6252987)
You can cut the doubler on the firewall fairly easy, even without pull the dash carrier. The 5 speed shifter has a plate/ring welded to the tunnel for the shifter boot. You'll see that when you pull the boot off and the trans out, it is welded to the underside of the hump |
Re: Parting 92 RS black interior 5 speed Still have the seat belts or are they gone? |
Re: Parting 92 RS black interior 5 speed How are the lower black plastics by the rear seats? Non faded/scratched up? |
Re: Parting 92 RS black interior 5 speed
Originally Posted by Fbdy-Z28-92
(Post 6253195)
Still have the seat belts or are they gone? |
Re: Parting 92 RS black interior 5 speed
Originally Posted by TTOP350
(Post 6253197)
How are the lower black plastics by the rear seats? Non faded/scratched up? |
Re: Parting 92 RS black interior 5 speed
Originally Posted by beths91camaro
(Post 6253092)
The 5 speed piece is not rusted out, and here is the firewall one. How far out do you need it cut? I wouldn't mind buying that cruise harness if it isn't spoken for too. And if you're not selling the harness for the dash, I would want the connector for the cruise and the connector the wire from the column plugs into for the cruise control , from the turn signal stalk |
Re: Parting 92 RS black interior 5 speed
Originally Posted by scooter
(Post 6253278)
If you look under the padding on the firewall, you can see where the doubler plate is, but if you cut out the steering column hole, and the cruise control harness hole, also also almost up to the area where the brake booster was. I wouldn't mind buying that cruise harness if it isn't spoken for too. And if you're not selling the harness for the dash, I would want the connector for the cruise and the connector the wire from the column plugs into for the cruise control , from the turn signal stalk |
Re: Parting 92 RS black interior 5 speed
Originally Posted by beths91camaro
(Post 6253231)
They aren't faded,, but they are scratched up pretty well. I may have another set in the rafters, but can't remember if they have the cut out for belts. |
Re: Parting 92 RS black interior 5 speed Are the door panels in good shape? Black? T top car? |
Re: Parting 92 RS black interior 5 speed 5 Attachment(s)
Originally Posted by Fireslash
(Post 6254550)
Are the door panels in good shape? Black? T top car? This car was not t top, but I have some t top things from the last car. What are you needing? |
Re: Parting 92 RS black interior 5 speed Wondering if you have the switch for the cruise control interrupt available for sale. It looks like this: https://cimg2.ibsrv.net/gimg/www.thi...d84c36bb6b.jpg |
Re: Parting 92 RS black interior 5 speed |
Re: Parting 92 RS black interior 5 speed Need a good steering column priced shipped to 33020 |
Re: Parting 92 RS black interior 5 speed
Originally Posted by beths91camaro
(Post 6251879)
Finally got into tearing it down. T5 setup is tentatively spoken for by a member on here. Black front buckles, with marks, but no cracks. Seat belts all work. The console vinyl pad is not cracked. Nice sail panels, not cracked shift plate- white logo, good working heater controls, drivers sill is not cracked, I believe I have passenger uncracked. Let me know what you need. I will be heading to TX in the AM, and will be back Sunday. Will pop in to answer questions as much as possible. |
Re: Parting 92 RS black interior 5 speed Hey I’m interested in the black plastics for the rear and seating area. Don’t need dash or centre counsel are. Black arm rests and all black seat belts. Plastic screws too Late then still available? What condition are they in? Do you have pics? |
Re: Parting 92 RS black interior 5 speed
Originally Posted by dannyvera778
(Post 6288335)
looking for steering column in good condition
Originally Posted by CHRISMAN2000
(Post 6288363)
Hey I’m interested in the black plastics for the rear and seating area. Don’t need dash or centre counsel are. Black arm rests and all black seat belts. Plastic screws too Late then still available? What condition are they in? Do you have pics? |
Re: Parting 92 RS black interior 5 speed
Originally Posted by beths91camaro
(Post 6288371)
Auto or manual? I have the plastics in the rafters- let me check and see condition. I have a beautiful set of carpeted, but those are without the shoulder seat belt holes. |
Re: Parting 92 RS black interior 5 speed
Originally Posted by dannyvera778
(Post 6288884)
Prefer manual but will take auto not worried about that shipped to 33020, pm’d |
Re: Parting 92 RS black interior 5 speed Do you still have the pedals, shifter plate or dash with cluster? |
Re: Parting 92 RS black interior 5 speed
Originally Posted by stroker86
(Post 6291201)
Do you still have the pedals, shifter plate or dash with cluster? |
Re: Parting 92 RS black interior 5 speed Hello, we are in need of a black seat belt guide for the driver side seat. Thank you |
Re: Parting 92 RS black interior 5 speed Sorry,wrong post |
Re: Parting 92 RS black interior 5 speed Do you have a fuse panel cover? |
Re: Parting 92 RS black interior 5 speed
Originally Posted by rushtk
(Post 6293228)
Hello, we are in need of a black seat belt guide for the driver side seat. Thank you
Originally Posted by iroczrockz
(Post 6303227)
Do you have a fuse panel cover? |
Re: Parting 92 RS black interior 5 speed I’m looking for the short black rear seat belt buckles. How much shipped to Jersey 07032? |
Re: Parting 92 RS black interior 5 speed Complete Driver's sun visor(T_Top or VERT) condition, color, shipped to 94954 Thanks |
Re: Parting 92 RS black interior 5 speed
Originally Posted by Mugsykfd
(Post 6304977)
I’m looking for the short black rear seat belt buckles. How much shipped to Jersey 07032?
Originally Posted by mikeceli
(Post 6304990)
Complete Driver's sun visor(T_Top or VERT) condition, color, shipped to 94954 Thanks |
Re: Parting 92 RS black interior 5 speed
Originally Posted by beths91camaro
(Post 6305313)
I believe I have a nice set- $30 shipped. I will check visors. I think I have a few nice ones. Sounds good on visor(s). Black would be my first choice, FWIW, |
All times are GMT -5. The time now is 05:22 AM. |
© 2024 MH Sub I, LLC dba Internet Brands