Patriot stage II cnc heads, comp xer273 cam Sold |
Re: Patriot stage II cnc heads, comp xer273 cam Bump new price 1100 |
Re: Patriot stage II cnc heads, comp xer273 cam Cam is sold |
Re: Patriot stage II cnc heads, comp xer273 cam Would those heads be good on the Lq4 in my pickup, or overkill? |
Re: Patriot stage II cnc heads, comp xer273 cam They would bump compression but make more power with the better port flow. Its a good sized head more ideal for higher rpm but a 6.0 has more cubes than the ls1 this setup was on. Pulled to mid 6000's with the small cam and held well to 7000 rpm shifts |
Re: Patriot stage II cnc heads, comp xer273 cam Flow on a local bench showed 272 at .585". 193 exhaust flow at .600. Seems lower than most benches, think stock 243's dont flow over 240-250 on this bench. They are an older patriot head, may not quite be 227cc but run hard on the ls1 it came off of Bump! |
Re: Patriot stage II cnc heads, comp xer273 cam
Originally Posted by zya5point0
(Post 5857977)
Would those heads be good on the Lq4 in my pickup, or overkill? |
Re: Patriot stage II cnc heads, comp xer273 cam Still got the heads |
All times are GMT -5. The time now is 03:55 PM. |
© 2024 MH Sub I, LLC dba Internet Brands