Getting Out of the LT1 Game - LT1 Engine Parts ALL ITEMS $10 OR LESS. ANYTHING LISTED AS $FREE PAY SHIPPING ONLY WITH PURCHASE OF $10 PART OR TWO $5 PARTS. Guys, my garage is basically full due to having too many projects going on and hoarding too many parts. I've got to get rid of stuff. I'm going to slash prices hoping to get SOMETHING out of these parts. If I have anything in 60 days, it's all going to the scrapper. ALL PRICES NEED SHIPPING ADDED! MULTIPLE ITEMS ARE PRICED PER EACH! BOLTS NOT INCLUDED! F-body oil pressure sender - $10 OBD2 Reluctor ring - $10 Stock oil pumps - $5 (2) stock crankshafts that both need turned - mileage unknown - $10 (2) sets of stock bore pistons - one with 75k, one with 175k - $10 Water pump w/ ECT sensor - $10 Bad stock head (some valvetrain parts?) - $5 Full valvetrain set (valves, retainers, locks, rockers, studs, etc.) - $10 TPS throttle position sensor - $5 IAC solenoid - $10 (2) kinda banged up oil pans - $10 Set of lifters (if I can find retainer clips) - $10 Water Pump Temp Sensor - $5 Head Temp Sensor - $5 Crank Balancer - $5 Windage Tray - $Free Camaro A/C Hard Lines - $5 EVAP Solenoid - $Free '94 Impala SS Cam - $5 Rear Main Seal Holder Plate - $5 AIR Bracket and Pump - $5 AIR Hard Piping That Goes Under Motor - $Free Oil Pan Rails - $Free Oil Pan Bolts - $5 Opti Vent Tubing - $10 (I might be out of these) EGR Solenoid - $Free OBD2 Crank Position Sensor - $5 PCV Tube (needs new rubber hose) - $Free Oil Pump Driveshaft - $Free MAP Sensor (no grommet) - $5 4L60E Flexplate - $5 Oil Pressure Sensor Elbow - $5 B-Body Oil Pressure Sensor - $Free Stock Timing Set - $5 Stock Hardened Pushrods - $5 Oil Filler Tube - $10 Ask me about bolts for longblock parts, I may have them (oil pan, timing cover, opti, motor mounts, TB, etc.) SOLD Water pump gear drive Lifters & dog bones Cam retainer w/ bolts Rockers Set of pushrods OBDI F-body balancer hub Rear main seal holder Valve covers Windage tray Timing set Throttle body w/ sensors AIR pump w/ bracket EGR diaphragm, solenoid, tube EVAP solenoid MAP sensor IAT sensor IAC solenoid Opti vent tubing Good stock head w/ valvesprings only Intake w/ MAP sensor, NO fuel rails (2) power steering pumps B-body OBD2 hub for Balancer '93 22# Injectors '94 Timing Cover Valve Covers T56 Slave Cylinder Oil Filter Adapter for Cooling Lines B-Body Offset Oil Filter Adapter w/ Oil Line Port Tensioner Pulley Tensioner Pulley Pair of OBD2 Knock Sensors Oil Dipstick w/ Tube Camaro accessory bracket Rear Main Seal Plate (2) OBD1 PCM's F-body starter Recycled: Frame Mounts Motor Mounts |
Re: Getting Out of the LT1 Game - LT1 Engine Parts Updated list. |
Re: Getting Out of the LT1 Game - LT1 Engine Parts Price with shipping to 99163 on the water pump? |
Re: Getting Out of the LT1 Game - LT1 Engine Parts I need bolts for the intake, timing cover and waterpump also need the windage tray, how much shipped to 92509 |
Re: Getting Out of the LT1 Game - LT1 Engine Parts The windage tray is connected to the main cap bolt/studs. You need just those 3 or all 10? I don't have intake bolts, but do have timing cover/opti and water pump (except I don't have the long stud for the water pump, I only have a bolt). I'll do $21 shipped for all of them via USPS. That's $6 shipping, $1 paypal, $15 bolts. paypal = hectormoore52@hotmail.com |
Re: Getting Out of the LT1 Game - LT1 Engine Parts I'd like the camaro accessory bracket, f-body starter, and the camaro ac lines please. I can do paypal. |
Interested in the Impala SS cam, how much shipped to 99336? |
Re: Getting Out of the LT1 Game - LT1 Engine Parts Hey boss, how much for both sets of Pistons shipped to 06480? |
Re: Getting Out of the LT1 Game - LT1 Engine Parts I'm out of town until Wednesday. I will let you know Wednesday night. |
Re: Getting Out of the LT1 Game - LT1 Engine Parts I was wondering do you happen to have a non vented opti and if so how much shipped to 61701 |
Re: Getting Out of the LT1 Game - LT1 Engine Parts
Originally Posted by xrgoose
(Post 5934261)
I was wondering do you happen to have a non vented opti and if so how much shipped to 61701 |
Re: Getting Out of the LT1 Game - LT1 Engine Parts
Originally Posted by sreZ28
(Post 5931490)
Hey boss, how much for both sets of Pistons shipped to 06480?
Originally Posted by HectorM52
(Post 5931506)
I'm out of town until Wednesday. I will let you know Wednesday night. |
Re: Getting Out of the LT1 Game - LT1 Engine Parts Back up. Trying to get garage cleaned out!! |
Re: Getting Out of the LT1 Game - LT1 Engine Parts Hi im looking for a roller cam set up doggbones spider bolts cam retainer....is the ss cam bigger then the lt1 cam ? |
Re: Getting Out of the LT1 Game - LT1 Engine Parts
Originally Posted by vtwinsroc
(Post 5947324)
Hi im looking for a roller cam set up doggbones spider bolts cam retainer....is the ss cam bigger then the lt1 cam ? I actually do not have the spider or dogbones anymore. I sold the last one I had. Sorry. |
Re: Getting Out of the LT1 Game - LT1 Engine Parts List edited and back up. |
All times are GMT -5. The time now is 06:12 PM. |
© 2024 MH Sub I, LLC dba Internet Brands