Third Generation F-Body Message Boards

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)
-   LSX and LTX Parts (https://www.thirdgen.org/forums/lsx-ltx-parts/)
-   -   [For Sale] Rebuilt LS 4l60e - Good for 500hp (https://www.thirdgen.org/forums/lsx-ltx-parts/757550-rebuilt-ls-4l60e-good.html)

TKO500 11-25-2018 02:36 PM

Rebuilt LS 4l60e - Good for 500hp
 
Pulling the 4L60e trans from my Camaro in preparation for an T56 conversion. Trans has only been in the car this season and saw roughly 300 - 400 miles. Built by Monster Transmission in Florida earlier this year.

Specs are:
  • Built to handle 500hp
  • Level 2 shift - firm upshift and will chirp the tires into 2nd if you are on it
  • 2000 stall converter
  • Transmission pan with drain plug
  • This configuration will run you $1750 from Monster before shipping and bellhousing purchase
Also included is the Lokar braided fill tube/transmission dipstick I ran with it. I also installed the same shift linkage as a 700R4 which allows you to install this in a 3rd gen and use the factory automatic shift linkage. The LS bell housing is not included. These can be purchased for $50 - $100. I purchased a blown transmission on craigslist for $50 to obtain a bellhousing.

$1350/bo - shipping is on you.

If you are shipping the trans I will strap to a palette and shrink wrap. Your pickup location zip code is 03076.

anesthes 11-29-2018 10:19 AM

Re: Rebuilt LS 4l60e - Good for 500hp
 

Originally Posted by TKO500 (Post 6264592)
Pulling the 4L60e trans from my Camaro in preparation for an T56 conversion. Trans has only been in the car this season and saw roughly 300 - 400 miles. Built by Monster Transmission in Florida earlier this year.

Specs are:
  • Built to handle 500hp
  • Level 2 shift - firm upshift and will chirp the tires into 2nd if you are on it
  • 2000 stall converter
  • Transmission pan with drain plug
  • This configuration will run you $1750 from Monster before shipping and bellhousing purchase
Also included is the Lokar braided fill tube/transmission dipstick I ran with it. I also installed the same shift linkage as a 700R4 which allows you to install this in a 3rd gen and use the factory automatic shift linkage. The LS bell housing is not included. These can be purchased for $50 - $100. I purchased a blown transmission on craigslist for $50 to obtain a bellhousing.

$1350/bo - shipping is on you.

If you are shipping the trans I will strap to a palette and shrink wrap. Your pickup location zip code is 03076.

Can't mate it to a SBC or ?

-- Joe


All times are GMT -5. The time now is 11:49 PM.


© 2024 MH Sub I, LLC dba Internet Brands