Anybody using a stock f-body 4L60e (ls1) dipstick with their swap? Just curious. I hate the lokar piece on the car right now... |
Re: Anybody using a stock f-body 4L60e (ls1) dipstick with their swap? Nobody is using a stock camaro/firebird 4L60e dipstick? |
Re: Anybody using a stock f-body 4L60e (ls1) dipstick with their swap? I used the tci replacement one. took a little bending but it fit alright. |
Re: Anybody using a stock f-body 4L60e (ls1) dipstick with their swap? The lokar piece I have now isn't secured to anything, the last 2 inches take some good force to push the stick in, and when you check the level it's very unclear if you're on or off the mark.... I'm just waiting to hear from somebody with a thirdgen and the stock GM piece that it fits our engine bay - and off to get my wallet I'll be. |
Re: Anybody using a stock f-body 4L60e (ls1) dipstick with their swap?
Originally Posted by macdadyZ28
(Post 4241118)
I used the tci replacement one. took a little bending but it fit alright. |
Re: Anybody using a stock f-body 4L60e (ls1) dipstick with their swap? I am using the stock 4l60e dipstick in my 82. I didnt have to do anything. |
Re: Anybody using a stock f-body 4L60e (ls1) dipstick with their swap?
Originally Posted by screeminchicken
(Post 4241580)
I am using the stock 4l60e dipstick in my 82. I didnt have to do anything. |
Re: Anybody using a stock f-body 4L60e (ls1) dipstick with their swap? Yeah, Jay used that on my car too, it's crappy, can't tell where it is filled to, it flops around, isn't attached to anything, and the little O-ring seals roll off and keep the stick from sealing.....I hate it. |
Re: Anybody using a stock f-body 4L60e (ls1) dipstick with their swap?
Originally Posted by $750 L98
(Post 4244219)
Yeah, Jay used that on my car too, it's crappy, can't tell where it is filled to, it flops around, isn't attached to anything, and the little O-ring seals roll off and keep the stick from sealing.....I hate it. I'm thinking now about getting the dipstick from a 04 GTO. It comes out in a nice spot back where the stock 700r4 one did. I'm going to the dealer tomorrow to get part #s/order. We'll see if they'll price match sdparts :lmao:I'll post up the part #s regardless. |
Re: Anybody using a stock f-body 4L60e (ls1) dipstick with their swap? I haven't test fit this yet, but plan to in the coming weeks. The part #s for an 04 GTO transmission dipstick and tube are: 92057977 - indicator 92159815 - tube |
Re: Anybody using a stock f-body 4L60e (ls1) dipstick with their swap? I'm running a 4l60E but with a 355 SBC. Anyways using the 700R4 dipstick and tube for the 4l60E. Not sure this is what you are asking. |
All times are GMT -5. The time now is 08:42 PM. |
© 2024 MH Sub I, LLC dba Internet Brands