Third Generation F-Body Message Boards

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)
-   Northern California (https://www.thirdgen.org/forums/northern-california/)
-   -   BRODIX TRACK ONE'S FOR SALE $1500 FIRM (https://www.thirdgen.org/forums/northern-california/623809-brodix-track-ones-sale.html)

3rdBird 08-07-2011 07:46 PM

BRODIX TRACK ONE'S FOR SALE $1500 FIRM
 
This is a deal! I'm selling my Brodix Track One's, they are Prof hand ported and has a new valve job complete with new Comp springs, and Manley valves, screw in studs and push rod guides.

I have run these heads with much success and the recent engine failure didn't effect the heads or valves. you can even have them rechecked by any machine shop before your buy.

I had a fresh valve job on them before my engine failure, and rechecked after and theyre perfect! There is no problem with them and have a receipt for the work. I will even throw in a warranty on them. They have 2.10 & 1.65 valves and flow 290 cfm. If youre running stock or mild heads, these will make a noticeable improvement!!!

I want to step up to the AFR 245's. I will use them if i can't sell em.

3rdBird 08-14-2011 10:42 PM

Re: BRODIX TRACK ONE'S FOR SALE $1500 FIRM
 
No one wants to go fast?

EvilCartman 08-16-2011 11:00 PM

Re: BRODIX TRACK ONE'S FOR SALE $1500 FIRM
 
They're not big enough ;) I'm going big block lol

1TUF92Z 08-16-2011 11:14 PM

Re: BRODIX TRACK ONE'S FOR SALE $1500 FIRM
 
My buddy had T1's (out of the box) it in a 377 and ran 8.80 in a 1/4 mile. I don't remember the trap speed but I know it was fast.

3rdBird 08-16-2011 11:55 PM

Re: BRODIX TRACK ONE'S FOR SALE $1500 FIRM
 

Originally Posted by 1TUF92Z (Post 5011956)
My buddy had T1's (out of the box) it in a 377 and ran 8.80 in a 1/4 mile. I don't remember the trap speed but I know it was fast.

They must have been ported paper thin, or even offset rockers???
Flow isn't a real big problem, especially when using a power adder. Just trying to make the most of it.

vindeezl 08-18-2011 12:10 AM

Re: BRODIX TRACK ONE'S FOR SALE $1500 FIRM
 
Bump for a great deal and a great seller!

3rdBird 08-19-2011 01:18 AM

Re: BRODIX TRACK ONE'S FOR SALE $1500 FIRM
 
:burnout:

Originally Posted by vindeezl (Post 5013015)
Bump for a great deal and a great seller!

Ah shucks. Thanks.

When I started racing 15 years ago, it wasn't until I put a pair 2.02/1.60 valved cast iron camel hump heads on my engine. That's when i realized that good flowing heads make a medicore car, a fast car.
Don't miss out on on some good priced go fast parts

UnderCover89TBI 08-19-2011 10:39 AM

Re: BRODIX TRACK ONE'S FOR SALE $1500 FIRM
 

Originally Posted by 3rdBird (Post 5014024)
When I started racing 15 years ago, it wasn't until I put a pair 2.02/1.60 valved cast iron camel hump heads on my engine. That's when i realized that good flowing heads make a medicore car, a fast car.
Don't miss out on on some good priced go fast parts

:lmao: Now that's a sales pitch!

JesasaurusRex 08-19-2011 04:02 PM

Re: BRODIX TRACK ONE'S FOR SALE $1500 FIRM
 
all i can tell you is never order anything directly from AFR, worst customer service ever. That being said I can't speak highly enough about their products....kinda sucks the way that works out.

dspencer24 08-30-2011 08:54 AM

Re: BRODIX TRACK ONE'S FOR SALE $1500 FIRM
 

Originally Posted by JesasaurusRex (Post 5014521)
all i can tell you is never order anything directly from AFR, worst customer service ever. That being said I can't speak highly enough about their products....kinda sucks the way that works out.

I def had the opposite experience with there customer service, they def came through for me, if anything the customer service will have me going back .

UnderCover89TBI 08-30-2011 10:35 AM

Re: BRODIX TRACK ONE'S FOR SALE $1500 FIRM
 
Yeah i remember your deal dspencer. When I read Jesse's post I forgot about your's but now you bring it up. That was some good customer service.

EvilCartman 08-30-2011 09:32 PM

Re: BRODIX TRACK ONE'S FOR SALE $1500 FIRM
 
Only problem I had was AFR didn't contact me they had to redo one of my heads, was a week or two delay. Meh, still got here no problem.


All times are GMT -5. The time now is 03:29 PM.


© 2024 MH Sub I, LLC dba Internet Brands