Need some stock front A-arms / lower control arms..
 

I know Jeremy needs a pair too, so it'd be ideal if we could get two pair :D

I'm going to be doing some experimenting and need the front A-arms to do it..

If anyone has some laying around, let me know! I don't care what shape the bushings or ball joints are in as long as the A-arm itself is straight..

Your lucky u put me in there too :-) lol

Im not in dire need, can rip them off the car, as its not moving till the engine goes in and the entire suspension and rear is rebuilt :-)

Just want a set so i can just swap it out all at the same time :-)

later
Jeremy

I'm not in dire need either, but I believe my use is a bit more useful than yours ;) Found a set for $35 shipped. If I get any other good offers I'll forward them to you. So far the only other offer is $160 shipped :eek: but one is 6 months old and the other is 2 years old... I don't need anything new though...jsut straight

You should check out the Junk Yard in blue island! I know you've been there Dean. 50% off on Mondays and almost every 3rd gen I saw there still had A-arms in decent shape.

Would be nice to pick up a set and have them sand blasted, por15'd with a new ball joint and bushings to put on the car.