Third Generation F-Body Message Boards

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)
-   Parts for Sale 2006 (https://www.thirdgen.org/forums/parts-sale-2006/)
-   -   BBK 58mm throttlebody and 52mm modified stock throttlebody (https://www.thirdgen.org/forums/parts-sale-2006/336830-bbk-58mm-throttlebody-52mm.html)

85MikeTPI 12-19-2005 08:00 PM

BBK 58mm throttlebody and 52mm modified stock throttlebody
 
1 Attachment(s)
Used BBK Twin 58mm TPI Throttlebody, with 1985 thru 1988(?)
throttle linkage. (not the "cam" type linkage)

http://store.summitracing.com/defaul...5&autoview=sku

$200 + S/H

Used Stock Twin 52mm TPI Throttlebody, with 1985 thru 1988(?)
throttle linkage. (not the "cam" type linkage)

(Stock TB is 48mm, this one has been bored and redone
with 52mm blades)

SOLD !

Both Throttlebodies are "bare" in that they come with
no sensors, no IAC adaptors, and no top name plates.

Located in Elkton, MD 21921

H0TR0Dn 12-19-2005 08:03 PM

Can you send me a pic of the redone stock 1 and who redid it?
Thanks

85MikeTPI 12-19-2005 08:22 PM

1 Attachment(s)

Originally posted by H0TR0Dn
Can you send me a pic of the redone stock 1 and who redid it?
Thanks

Work was done by www.skulte.com

85MikeTPI 12-22-2005 12:56 PM

58mm BBK TB still for sale
 
52mm TB sold, 58mm still for sale.. Orig post updated.

85MikeTPI 05-06-2006 09:17 AM

I finally got around to installing my monoblade throttlebody
so the BBK 58mm TB is still available. Make offer

My1986IROC-Z 05-06-2006 10:25 AM

Interested in the 58mm, just awaiting a quick PM from a buddy to make sure it would work on my set-up. How long did you use it for? and how about $175 shipped to Georgia.
Tony

85MikeTPI 05-06-2006 01:42 PM


Originally Posted by My1986IROC-Z
Interested in the 58mm, just awaiting a quick PM from a buddy to make sure it would work on my set-up. How long did you use it for? and how about $175 shipped to Georgia.
Tony

I've used it for 6 years. I'd take $185 MO shipped to Georgia. Paypal
surcharges would apply if payment through PP.

thanks
mike

leathalirocz 05-08-2006 08:36 AM

Hey Mike, is there any play in the throttle shaft on the 58mm? I will be installing on my 87 Iroc with a stealth ram so there shouldnt be a problem, do you have any Pic of it? I live in Dallastown Pa so i could pick up since your not far away, will you take 175 if i pick up, let me know if you have any Pic and if so you can email them to me at leathalirocz@yahoo.com Thanks Chad.

85MikeTPI 05-08-2006 09:01 AM


Originally Posted by leathalirocz
Hey Mike, is there any play in the throttle shaft on the 58mm? I will be installing on my 87 Iroc with a stealth ram so there shouldnt be a problem, do you have any Pic of it? I live in Dallastown Pa so i could pick up since your not far away, will you take 175 if i pick up, let me know if you have any Pic and if so you can email them to me at leathalirocz@yahoo.com Thanks Chad.

Here's some pics during my 427 install last Fall:

DCP_3150
DCP_3151
DCP_3148

No play that I'm aware of.

If you'd like to send a $25 deposit via Paypal to hold it, that would be fine.

mike

leathalirocz 05-08-2006 01:50 PM

I'll tell ya what, id just as soon if its ok with you, send the whole amount via Paypal for $185.00 dollars if you wouldnt mind shipping it to me. With the price of gas it would wash out anyhow running down there, as long as its in good working order ill take it. What did you drop that 427 in anyhow, looks pretty tough! I will need your email address to send the money to you, mine is posted upline so hope to hear from ya, Thanks again Chad.


All times are GMT -5. The time now is 04:24 AM.


© 2024 MH Sub I, LLC dba Internet Brands