Third Generation F-Body Message Boards

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)

- Parts Wanted 2006 (https://www.thirdgen.org/forums/parts-wanted-2006/)

- - Flat tappet cam (https://www.thirdgen.org/forums/parts-wanted-2006/345021-flat-tappet-cam.html)

9D1BURD

02-06-2006 10:23 AM

Flat tappet cam

Looking for a good flat tappet cam for a 305 TPI. Something in the range of 210 to 220 degrees duration intake/exhaust. Less than .480 lift to stay safe with stock heads.

Looking for something cheap. Used is okay as long as the lifters can be paired with the lobe they were on and there isn't much wear. Stock '85 cam would be okay as well, but prefer aftermarket.

89 IROC DROP TOP

02-06-2006 09:26 PM

I have a LUNATI 00016 cam & lifter set brand new !!!! & no shipping 'cause I live in Elgin !!!! $100 Look it up on there web site for the #'s !!!! MEL 1-847-888-1463 home 1-847-987-2451 cell :thumbsup: :burnout: 248/284 duration .458 lift 1500-5200 RPM range !!!!

mcbchild

02-08-2006 03:40 PM

I have a good street hyd flat tappet cam for the 305. TRW 204-214 dur. Used for about 7 hours just to get the engine running correctly. $50 and can pick up a set of Summit lifters for about $40 or the TRW lifters for $49. I kept the lifter for my other cam I put in the engine.

89 IROC DROP TOP

02-08-2006 07:26 PM

ttt:doh:

1badrocZ

02-08-2006 11:20 PM

i have the stock 85 tpi cam for sale if that is what you are looking for? Only has 39,000 miles on it.

All times are GMT -5. The time now is 10:30 AM.