Z28tt Progress Pictures!
 

Must be something in the water... Work is getting done on the Z28tt. I put a bunch of the pictures from the last few weeks up at: http://skulte.dyndns.org/Z28tt/Oct2003/

You want to make those pics a little bigger!!! :D

THat looks real good. I am looking forward to putting my T64 on if I don't sell the car.

Lookn Good!! :thumbsup:

Nice to see you making some progress Andris :)

looks awesome..

any more Pic's

got any pics of the routing of your drivers side downpipe?

Man, that twin turbo setup looks sweet. I'm planning on ordering the Banks TT manifolds in a few weeks and start working on a setup for my GTA. Just one question, the Banks manifolds don't include the downpipes, right? Looks like I'll have to fab up my own.

The downpipes don't come with the Banks manifolds. I've got the downpipes dumping right out. The wastegate points out, and the downpipes make about a 110 degree bend down, and then turn back to end just below the frame rails. They bend a bit to clear the steering linkages, etc... If you do get the manifolds, do whatever you can to open up the wastegate ports. Maybe my exhaust housing is on the smaller side (.58 ar, I wanted fast spool up for road racing), but with the old combination, I was starting to see some boost creep, and I'm sure it wasn't due to the open dump tubes.

can you use the banks manifolds with the serpentine setup? looks like the turbos would hit the alt and compresor.

Yeah, the wastegates protrode out the front. I had to move the alternator over to where the AC used to be, and move the power steering bracked down about an inch. I've posted pictures of the front of the engine before, linked off of http://www.skulte.com/logbook.html. Hope this helps!

A.

That link gives me a:

File Not Found

The referring document was: https://www.thirdgen.org/techbb2/sho...postid=1529385

The requested object does not exist at the specified location. The link you followed is either outdated, inaccurate, or the server has been instructed not to let you have it.

Anyway, looks good... I like how you cut the dash around the dash brace and diagonal.

I want your steering wheel.
:D

Mark,

Copy and Paste the URL for some reason it wouldnt let me just click it either.

yea, just figured it out, it's the period at the end of the url

http://www.skulte.com/logbook.html

:)

heh, bob is a little smarter then me...
;)

Andris skulte , I bought some billet adapters from you years ago for my s10. Small world. TT project looking good. Check out my "adapters" in this thread. https://www.thirdgen.org/techbb2/sho...74#post1530374

sweet setup :hail:

Edit - I meant to say "dump pipes" above. I've got open dump pipes from the wastegates, and 2.75" dia downpipes going to a 3.5" Y pipe, and a plain 'ole SLP catback. Once it's running, a weekend project will be to fab up 3" downpipes, to a dual exhaust dumping in front of the rear wheels w/ the flat NASCAR style boomtube exits.

TPI383, I haven't tried licking links yet. The monitor would probably zap your tongue, like sticking it on a 9V battery, not that I would know anything about that :D

614, glad to see your truck is together. That's a really cool blower setup on the V6 :) The pictures look great!

There's a time trials at LimeRock on Friday, and hopefully on Saturday I'll have enough finished to fire it up for the first time. The butterflies are going...

Andris