Third Generation F-Body Message Boards

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)
-   South East Region (https://www.thirdgen.org/forums/south-east-region/)
-   -   code 51 (https://www.thirdgen.org/forums/south-east-region/768288-code-51-a.html)

LetzRoc1989 02-03-2020 07:22 AM

code 51
 
I own a 1989 5.7 iroc. 50 k original miles and I am original owner. Throwing a code 51. suggestions? Thank you

Tuned Performance 02-03-2020 08:38 AM

Re: code 51
 
The memcal usually isn’t the problem. You should try ecm replacement first.

LetzRoc1989 02-03-2020 08:54 AM

Re: code 51
 
where is ECM located and how hard to remove? THX again

Tuned Performance 02-03-2020 09:01 AM

Re: code 51
 
It’s located under the dash on a bracket on the passengers side.
there are two 7mm screws I think that hold the bracket to the dash frame.

LetzRoc1989 02-03-2020 09:14 AM

Re: code 51
 
thank you. Thinking about using Module Experts for repair. Any idea if they are a good one? Thank again!

Tuned Performance 02-03-2020 09:29 AM

Re: code 51
 
I have never heard of them. You can get a reman ecm at RockAuto.com
the service is a 1227165.
https://www.rockauto.com/en/catalog/...computer),2896
if you find your car has a Hypertech memcal or a piggyback chip adapter I would think those could cause the code.

LetzRoc1989 02-03-2020 09:33 AM

Re: code 51
 
car is still factory - I have never made any changes to it. Like to get a better chip and more performance.

While I am an old jet fighter mechanic, USAF - I am for sure not versed well enough in cars to mess with things too much. Thx again.

BIRD91ZRAG 02-03-2020 05:22 PM

Re: code 51
 
Does the car run ok, or did it start having issues?
Every vehicle I worked on that threw a 51 was running like crap and needed an ECM.

LetzRoc1989 02-04-2020 08:07 AM

Re: code 51
 
what is weird, is it is very intermittent. When cold out, 40's here in South Carolina, runs great. Sporadic check engine, like it loses a cylinder, but keeps running. When hot out, more often and stays on. But will still run. always start as well. Thx for helping me.


All times are GMT -5. The time now is 10:38 AM.


© 2024 MH Sub I, LLC dba Internet Brands