Super Ram AFR Heads
 

I tried to sell my 1988 Corvette but have received no interest at a reasonable price. So, I'm thinking of parting it out. Let me know if you're interested in the following parts.

Super Ram already welded and ported out with an Edelbrock intake also welded and hogged out.
AFR 195 heads with 7/16" studs.
XFI268 cam
BBK 58mm throttle body
Ultra Pro Magnum; Rocker Arm; Stud 7/16 in. Ratio 1.6

Re: Super Ram AFR Heads
 

Throw some prices up for your parts when you get a min.

Re: Super Ram AFR Heads
 

How much for the AFR 195s?

Re: Super Ram AFR Heads
 

So sorry you have to part it out. :( What about putting the engine into your Camaro?

Re: Super Ram AFR Heads
 

Any prices?

Re: Super Ram AFR Heads
 

Sorry for the late reply guys. The super ram and intake went within a couple of hours after posting.

I have the AFR 195 L98 65cc heads off the car now. I'll take what I paid for them, $1,000. They're in great condition. I'll through in the 1.6 rockers for an additional $100. The rockers are much better than the Scorpions.
I'll let the XFI268 go for $200.

Yeah Kevin, all the corvette guys wanted the car for almost free. It was running and only needed the camber rod and end links replaced. I just don't have room for it anymore and the Camaro is running good. I did buy a used RV which will go in the Corvettes spot once I'm done parting it out.

Re: Super Ram AFR Heads
 

Are the heads still available?

Re: Super Ram AFR Heads
 

"deleted"