Is it bad to grease the endlinks on out cars?
 

Im getting squeaks from my rear left and I want it to go away. I do remember hearing somewhere that your not supposed to. Just want to make sure.

Re: Is it bad to grease the endlinks on out cars?
 

There are no endlinks in the rear of thirdgens. Are you talking about the control arms?

Re: Is it bad to grease the endlinks on out cars?
 

Hmm sorry if I dont know any better but the bushings that go on the end of the sway bars. I thought they were called endlinks. I do have a rear sway bar.

Re: Is it bad to grease the endlinks on out cars?
 

it might not be called an endlink just because it is on the rear or maybe your car doesn't have a rear swaybar. but they are endinks.

Re: Is it bad to grease the endlinks on out cars?
 

well got down and couldn't get up, should he grease them or not, could be from the pan hard also........

Re: Is it bad to grease the endlinks on out cars?
 

So...

Re: Is it bad to grease the endlinks on out cars?
 

you know personaly i see no problem with it, but if i was going to take it off to grease it would go get some poly bushing to replace the rubber ones

Re: Is it bad to grease the endlinks on out cars?
 

Ohh forgot to mention they are poly bushings.

Re: Is it bad to grease the endlinks on out cars?
 

poly bushings always love grease as long as its synthetic and not petroleum based(will eat the bushings)

Re: Is it bad to grease the endlinks on out cars?
 

Really! Hmm I need to check out what type of grease I have then. Thanks.

Re: Is it bad to grease the endlinks on out cars?
 

silicone grease or moli grease will work, anything made from petroleum will melt it

Re: Is it bad to grease the endlinks on out cars?
 

This will work if they squeak. By the book, and Energy instructions, do not grease end links.

Re: Is it bad to grease the endlinks on out cars?
 

i thought that was a given? lol

Re: Is it bad to grease the endlinks on out cars?
 

Definately grease the swaybar bushings, they even come with a little packet of the stickiest grease I've ever seen...

Endlinks, well greasing really won't do much there; unless you foresee r&r'ing them more than once in their life cycle (ei. 4x4 offroading) in which case some antiseize on the shaft and threads may be a nice thing...

Re: Is it bad to grease the endlinks on out cars?
 

Oops. I clicked the wrong thread.