steering box removal? i am in the process of removing the steering box. I have everything off and the steering box is free, the only thing still connected is the pit arm, i tried unbolting it from the suspension but wont even budge, so i tried unbolting it from the box but still wont budge, is there a special way to remove it or do i need to use more force? |
Re: steering box removal? on bolt the connection to the centerlink, its a ball joint, so its a wedge fit connection. You need a separator,pickle fork, and beat it in between the ball and the pitman arm. Or, screw the nut back onto the ball joint so that its loose, and just a tad higher than the threads, give it a could hard whacks with a 2lb hammer, and it should break loose. |
Re: steering box removal?
Originally Posted by //<86TA>\\
(Post 4436497)
on bolt the connection to the centerlink, its a ball joint, so its a wedge fit connection. You need a separator,pickle fork, and beat it in between the ball and the pitman arm. Or, screw the nut back onto the ball joint so that its loose, and just a tad higher than the threads, give it a could hard whacks with a 2lb hammer, and it should break loose. :thumbsup: |
All times are GMT -5. The time now is 09:59 AM. |
© 2024 MH Sub I, LLC dba Internet Brands