Installing Subframe Connectors? Anyone here put these things on yet? I have a 92 RS w/t-tops. What brand do ya'll recommend? The cheapest I've seen are the Jegsters, of course in Jegs. They're about $180. They say that they're designed to clear the stock exhaust. That's what I want. I noticed a lot of other companies say theirs won't clear the stock exhaust. https://www.thirdgen.org/messgboard/confused.gif I also wanted to know how much of an improvement they made? And how much of a pain in the a-- they are to put in? I am gonna be putting in a 350 that I am building right now. I know the car twists like heck now with the 305 in there. So I'm gonna need them. Any response will be very helpful. Thanks |
Please search the boards - this topic has been covered countless times. Personally, I have the Spohn SFCs. They make an amazing difference - especially if you have t-tops like I do. I had mine welded in at a shop, cost for installation: $150. I have headers and the Flowmaster 3" exhaust and had no clearance problems at all. The fit is excellent! I think there are some out there alot cheaper than $180, but in discussions over cost the result always seems to be: you get what you pay for. |
I must say that I am thinking along the lines of bolt-in connectors. I would rather do the work myself and I don't know how to weld. If the bolt in ones really suck then tell me. Thanks again |
the bolt in one suck from what I have learned here. The hole stretch out over time and become less effective. get yourself some weld-in ones and have a pro do it. ------------------ 91' red RS convert. 71,000 miles 89' IROC hood red Z-28 16" rims potenza re730's MSD ignition MSD coil K&N fiter 350 ported polished heads hypertech chip flowmaster 40 series cat-back |
or he could get the bolt in ones. install them, drive his car down to the local muffler shop, have them weld some lines on the seams and ta-dah he is done. ------------------ Jarrad 1990 IROC-Z L98 350 TPI TH-700R4 G92- 7.5" 10 Bolt 3.23gears Bright Red Hardtop/ Grey Custom Interior 5,507 IROC's Hardtops/Ttops; 2,415 5.7L IROC's Produced in 1990 DAILY DRIVER: 1991 S10 2.5L/5SPD WITH CAMARO RIMS |
Actually I'd thought about doing that. Why couldn't they just weld the seams. I just know that the metal has to be very clean in order to obtain a good weld. Would they be able to do that, or should I prep the surface before I bolt them on? That way they would be free of debris and rust. Although, the rear part bolts to the lower control arm. Could they weld around there? Thanx RARE-ROC-Z |
hey you dont need to weld the rear part that bolts to the LCA bracket, it wont move anyways, think about it, it has enough stress already, it can handle more!! its the front bolt holes that oblong! so just have them weld them there! and you will be perfectly fine |
Thanx dudes. I have been putting this off for sometime just because of my ignorance. I think I'll be callin' Jegs today. https://www.thirdgen.org/messgboard/smile.gif JUST SAY NO TO T-TOP RATTLE!!!!!!! https://www.thirdgen.org/messgboard/biggrin.gif |
<font face="Verdana, Arial" size="2">Originally posted by AJ_92RS: Thanx dudes. I have been putting this off for sometime just because of my ignorance. I think I'll be callin' Jegs today. https://www.thirdgen.org/messgboard/smile.gif JUST SAY NO TO T-TOP RATTLE!!!!!!! https://www.thirdgen.org/messgboard/biggrin.gif</font> |
how much is the shipping on sfcs from jegs? |
Jeg's gives free shipping, but they add like $6 or $7 for P&H. I have ordered stuff from them quite a few times and have always been happy with their attitude. They are super helpful. That and everything came to my house faster than what they said it would. I hate it when I call somewhere and I know more than the other guy who is supposed to be selling me something. Jeg's ain't like that. |
I have some hotchkis SFCs sitting in my closet,yes they are weld in. I'm not procrastinating,I just need to find someone who's not a total jackass,that can do some welding for me (and move that headmen y-pipe out of the way) if your going through all the trouble,might as well use the beefy stuff! I'd recomend the hotchkis,those things are SOLID! |
<font face="Verdana, Arial" size="2">Originally posted by AJ_92RS: Anyone here put these things on yet? I have a 92 RS w/t-tops. What brand do ya'll recommend? The cheapest I've seen are the Jegsters, of course in Jegs. They're about $180. They say that they're designed to clear the stock exhaust. That's what I want. I noticed a lot of other companies say theirs won't clear the stock exhaust. https://www.thirdgen.org/messgboard/confused.gif I also wanted to know how much of an improvement they made? And how much of a pain in the a-- they are to put in? I am gonna be putting in a 350 that I am building right now. I know the car twists like heck now with the 305 in there. So I'm gonna need them. Any response will be very helpful. Thanks</font> www.Spohn.net |
I have Steve Spohn's subframes and it is an amazing difference once they are installed.... Get Spohn's connectors... they are the best.... |
i have heard great things about all steve spohns stuff,a few buddies have his suspension items and they say its great quality for the money,i was just wondering if anyone knows his price shipped for the sfcs?,i also am wondering if anyone has heard of BMR,i have heard they sell knockoff crap copied from other companies designs. |
I like Global West's tubular version. The fit is first rate, and at least on my 85 IROC, there was no exhaust modification required. Pics available, should anyone be interested. I belive $190 shipped. JamesC ------------------ [This message has been edited by JamesC (edited May 14, 2001).] |
IROC KID: I have a BMR STB and I think it is great. I got great service from them and it is a great looking piece with "BMR" cut into the middle of the bar - hard to explain but looks really cool. |
yeah,i checked out BMRs site and the strut tower brace does look good,i just hear that the sfcs and some other stuff is copied cheaply of other companies products,how long did it take you to put in the strut tower brace from them?,is it a nice piece and well fabricated? |
Hey JamesC, could you e-mail me some of the pics of those subframe connectors? I am planning on getting some of those from Global West on the 1st. My e-mail is "blacksunshine@transamgta.com" (I don't know how to make the nifty links from this page). P.S. I will be putting the aluminum d-shaft I got from you in at the same time along with a few other items(new tranny from Pro-built, hotchkis LCA's, etc.) ------------------ '91 GTA with TPI 350 & T-Tops. Just a few mods, if you want to find out just line up next to me at a stoplight! Added bonus: Wife's car is a '00 Grand Prix GTP! |
Hey, Black, You have mail. JamesC ------------------ |
Hey James how about sending me som pics if you dont mind ...I'll be looking for a set soon.. Thanks ------------------ Hecubus Check out my new site http://www.geocities.com/hecubus91 91-Z28 305 Tpi "G92" mods-- K$N/Foil/Cat Back 3" Flowmaster/3" High Flow Cat/B&M shifter/ Intrax Springs/ Kyb Shock's-Struts's/Poly Bushings/Hotchkis Strut Tower Brace/Nos Wet Plate System currently ~200hp shot/ 155lph Fuel Pump/ Holly Adj. Fuel Press. Regulator/Digital Fuel,Air-fuel, voltage & Oil Press Guage's/MSD 6al/ Blaster coil/ Optima,Yellow top batt. "I spent all my money on race cars, beer, and Broads... The Rest I wasted" |
All times are GMT -5. The time now is 06:55 AM. |
© 2024 MH Sub I, LLC dba Internet Brands