Third Generation F-Body Message Boards - Pinto Rack w/ stock spindles

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)

- Suspension and Chassis (https://www.thirdgen.org/forums/suspension-chassis/)

- - Pinto Rack w/ stock spindles (https://www.thirdgen.org/forums/suspension-chassis/710965-pinto-rack-w-stock.html)

Hosed82

11-07-2014 05:14 PM

Pinto Rack w/ stock spindles

I have a Racecraft k member, ordered a pinto rack from them and it appears too long...As if the inner tie rods are too long and do not leave enough room for the bumpsteer kit to thread on and still have adjustment. They claim i need their drop spindles to make this all work.

Has anyone ran this setup with stock spindles?

572_Rat

11-07-2014 09:53 PM

Re: Pinto Rack w/ stock spindles

The pinto rack they sold me was a unisteer rack that was shorten to fit the 3rd gen Camaro, you did not need their spindles to make it work

Hosed82

11-08-2014 11:33 AM

Re: Pinto Rack w/ stock spindles

I also heard that PA racing offers a 41" rack rather than the 45.5".

All times are GMT -5. The time now is 08:21 PM.