Question for people with stock style front struts and coilovers
 

If you have installed coilovers on a stock style strut I have a few questions. I have the adjuster sleeves and the springs already. What I don't have is the top spring seat parts. What did you use at the top of the spring? I have J7M caster camber plates on the car now but still have a nice pair of stock plates too.

Re: Question for people with stock style front struts and coilovers
 

I used the Spohn kit. It has a bearing for the strut. It also uses thrust bearings for the spring so you end up
with thrust bearings on the top and the bottom of the spring.

Re: Question for people with stock style front struts and coilovers
 

Spohns kit uses their CC plates and the spring sits inside the CC plate. I don't have Spohn CC plates so that design won't work with what I have.