Third Generation F-Body Message Boards - fuel line fitting size?

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)

- TBI (https://www.thirdgen.org/forums/tbi/)

- - fuel line fitting size? (https://www.thirdgen.org/forums/tbi/658607-fuel-line-fitting-size.html)

kill4thril

08-01-2012 10:34 PM

fuel line fitting size?

I am putting a carb on my car and have been trying to figure out what size the fittings on the fuel lines are and what size lines i would need looking to use steel braided line i did a search on here and all i could fined was the tpi line size so i googeled it and found a site saying the inlet line was a 3/8 and the return was a 5/16 ? is this right and if so what size line would i need? :help:

thanks for the help

Ronny

08-03-2012 11:01 AM

Re: fuel line fitting size?

http://z28boy.cz28.com/

Not all on this site is accurrate but above prob is...

UnderCover89TBI

08-03-2012 11:08 AM

Re: fuel line fitting size?

click on tbi tech. then fuel line info. and you'll see the information you need to convert to carburetor.

and i am talking about on the site listed by Ronny

All times are GMT -5. The time now is 10:39 AM.