Third Generation F-Body Message Boards - First year for VATS in the Vette

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)

- Tech / General Engine (https://www.thirdgen.org/forums/tech-general-engine/)

- - First year for VATS in the Vette (https://www.thirdgen.org/forums/tech-general-engine/20381-first-year-vats-vette.html)

BadSS

11-25-2000 06:02 PM

First year for VATS in the Vette

Anyone know what the first year for VATS were in the Vette? Thanks for any replies!!

[This message has been edited by BadSS (edited November 25, 2000).]

GMTech

11-25-2000 07:15 PM

1985

------------------
If you live in Southeastern US, check us out!
South East Thirdgen

ASE Master Tech + L1
Savannah, GA

'87 Trans Am
S/D TPI retrofit including functional PassKey,
22# injectors,
JET AFPR,
Ported Plenum,
TB Coolant Bypass,
SSM SFC,
Boxed LCAs,
8mm Accel wires,
Flowmaster Exhaust,
16" GTA rims,
Corvette Servo,
KYB Shocks
-->14.97 @ 94.9 MPH<--

'97 Bonneville SSE

TransamGTA350

11-26-2000 05:57 PM

I believe it was 1986.

89 Transam GTA, a few bolt ons

GMTech

11-26-2000 06:16 PM

Your right, I double checked my sources, and it is 1986. I don't know where I came up with '85 from. Thanks, GTA350

------------------
If you live in Southeastern US, check us out!
South East Thirdgen

ASE Master Tech + L1
Savannah, GA

'87 Trans Am
S/D TPI retrofit including functional PassKey, 22# injectors,
JET AFPR, Ported Plenum,
TB Coolant Bypass,
SSM SFC, Boxed LCAs,
8mm Accel wires,
Flowmaster Exhaust,
16" GTA rims,
Corvette Servo,
KYB Shocks
-->14.97 @ 94.9 MPH<--

'97 Bonneville SSE

All times are GMT -5. The time now is 03:34 PM.