harmonic balancer center bolt stripped bolt came loose and wobbled. pulley came off. i took the balancer out but the crankshaft hole is stripped. the centerbolt wont go back in. |
Heli-coil |
what is a heli coil |
Heli-Coil You could also try to use a tap and thread the hole to fit a different size bolt. Is it completely stripped or just the first part of the threads stripped ? |
just the first part |
how deep on the bolt is it stripped??? id get a new bolt for it and a tap and clean the threads out really good and see if it will work |
The stock hole in the crank is 7/16" x 20 The next size bolt is 1/2" x 20 First try to tap the existing hole with the 7/16" tap. Make sure that the bolt has clean threads. If the threads are too buggered up, then tap with 1/2" x 20 and buy a larger bolt. Also any of the 7/16" threads will help guide the 1/2" tap. |
All times are GMT -5. The time now is 07:01 PM. |
© 2024 MH Sub I, LLC dba Internet Brands