Has anyone put a surpentine pulleys on a 400
 

will the reverse cooling work on a 400 sbc. I just bought the pullies and brackets to change it over. Will it affect the cooling or make it overheat.

------------------
www.geocities.com/camaro1j/myz28.html


406
accel supper ram
6000 rpm Hyd roller cam
afr heads
spohn torque arm and crossmember
t-56 trans, [wier racing bellhousing and hydrolic throwout bearing]
9" ME rearend 3.91 Gears

It's actually just a reverse rotation pump. It still flows the "traditional" way. The LT-1's use a reverse flow system.

Thanks, I just didn't want any cooling problems.

BTW, What cam are you using???? I am currently building a Super Rammed 406 and had not yet decided on a cam for it.

I have a crane cam it has alot of power.
part# 119831
grind # hr-284-2s-12 IG
222.0-230.0 duration
509-528 lift
2500-6000 RPM

LOOK AT MY WEB SITE FOR THE REST OF MY MODS.



------------------
www.geocities.com/camaro1j/myz28.html


406
accel supper ram
6000 rpm Hyd roller cam
afr heads
spohn torque arm and crossmember
t-56 trans, [wier racing bellhousing and hydrolic throwout bearing]
9" ME rearend 3.91 Gears