Third Generation F-Body Message Boards

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)

- Tech / General Engine (https://www.thirdgen.org/forums/tech-general-engine/)

- - Code 25 and need help (https://www.thirdgen.org/forums/tech-general-engine/467812-code-25-need-help.html)

draco

03-28-2008 05:03 PM

Code 25 and need help

I understand that with a code 25 i need to check my MAT sensor and wiring. I have a '91 RS 3.1l V6, MPFI. Where exactly is the MAT sensor?

Thanks fellas

ladyjynx

03-28-2008 06:34 PM

Re: Code 25 and need help

The air intake duct or air cleaner housing.

draco

03-28-2008 09:41 PM

Re: Code 25 and need help

Gotcha, I just noticed that i actually had to move it. I installed the TPI air box on my car and i had to relocate that sensor. I drilled and tapped a hole into the MAF housing and put it there. I traced my wires and noticed i had a bare spot that was shorting out. Looks like that did the trick. Thanks anyways :chevy:

ladyjynx

03-29-2008 01:15 AM

Re: Code 25 and need help

Glad you got it covered. :)

All times are GMT -5. The time now is 02:17 AM.