Third Generation F-Body Message Boards

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)
-   Tech / General Engine (https://www.thirdgen.org/forums/tech-general-engine/)
-   -   Main and rod bearings (https://www.thirdgen.org/forums/tech-general-engine/649646-main-rod-bearings.html)

jas2730 04-26-2012 08:58 PM

Main and rod bearings
 
Hey guys, I'm replacing the bearings in my 350. Stock range on the mains are 2.4484-2.4493. Mine came out to be 2.4475. Stock range on the rods are 2.099-2.100. Mine are 2.097. My question is what size bearings do i need? Are these numbers close enough to just order stock size replacements? Thanks in advance.

jas2730 04-27-2012 06:53 AM

Re: Main and rod bearings
 
Bump.

Edwardgp 04-27-2012 07:10 AM

Re: Main and rod bearings
 
The last time I did one like that the machinist told me to use 2thousants over size bearings. You should go in and talk to your local machinist and see what he says.

jas2730 04-27-2012 09:04 AM

Re: Main and rod bearings
 

Originally Posted by Edwardgp (Post 5256257)
The last time I did one like that the machinist told me to use 2thousants over size bearings. You should go in and talk to your local machinist and see what he says.

I called up Fel-pro and they really went above and beyond to help me figure out what sizes i needed. Great people in their tech department. Thanks everyone.


All times are GMT -5. The time now is 06:45 PM.


© 2024 MH Sub I, LLC dba Internet Brands