loose wire
 

87 irocz v8 305 tpi
The wire appears to have the connector broken off , but Where does it connect to?
https://cimg1.ibsrv.net/gimg/www.thi...6cc6688e2f.jpg

Pic 1

https://cimg3.ibsrv.net/gimg/www.thi...aa6d7acf16.jpg

Pic 2

Re: loose wire
 

Looks like it probably goes to the fan switch. Note the switch between the plug wires in the first pic.

Re: loose wire
 

Where does it plug into and how do I replace it? Any part #s?

Re: loose wire
 

It plugs into the only open sensor in your photos. The fan switch is between the #6 and #8 spark plugs, can't miss it. The wire is missing the plastic shell that would snap onto the fan switch, it'd look just like the plastic shell on the knock sensor which is visible in the second photo next to the starter. Search for a fan switch pigtail at your favorite auto parts website. Should be able to just remove the plastic shell from the pigtail and snap it onto the existing terminal.

Re: loose wire
 

Visual of what drew explained:


https://cimg9.ibsrv.net/gimg/www.thi...89107e69e2.jpg

connector you will need:

http://www.ebay.com/itm/like/311674922470?lpid=82&chn=ps&ul_noapp=true

Re: loose wire
 

https://cimg5.ibsrv.net/gimg/www.thi...c90a71d25b.jpg

Ok thx I found it! ordered at NAPA Standard part # S-550 thx drew!!

Re: loose wire
 

Thx batman!!