Quite Roller lifters OEM
 

My 383 up and running BUT I have lifter ticking noise I tryed to adjust them but can get rid of the noise.
I purchased the lifter used they are stock OEM GM everytime I think I saving my self a couple Bucks it turn around and bits me in the rear.
What I have read the 1st Gen OEM GM lifter are know to tick.
The motor will never rev past 5500 RPM's so I dont need a high end high dollar lifter set up.
I running a LT4 Hot cam, Comp Cam Ultra steel 1.6 RRA stock size Harden push rods with guild plates, I dont want to change anything just new QUITE lifters.
But which Brand and what part # I looked at 2nd Gen GM Lifter But I seeing 2 diffrent part numbers which one will work and quite.
I read stay away from Comp Com R lifters hard to get adjusted in.
Anyone what brand and part Number that will not break the bank.

Re: Quite Roller lifters OEM
 

I end up ordering a set of Generation 2 GM lifters from Jegs $121.00.

Re: Quite Roller lifters OEM
 

The ticking is prolly the roller rockers, not the lifters..

Re: Quite Roller lifters OEM
 

No it's not rocker arms it a lifters.

Re: Quite Roller lifters OEM
 

Ok.. good luck with the swap!!! Let us know how it goes :)

Re: Quite Roller lifters OEM
 

How does it sound. If its nice and quite I will be following in your footsteps.

Re: Quite Roller lifters OEM
 

Fired it up today thats the way it should run.
The new lifters did the trick.