350 tpi building
 

will these work with stock block?
http://www.ebay.com/itm/SB2-JE-Forge..._Parts&vxp=mtr

http://www.ebay.com/itm/Carrillo-H-B...sories&vxp=mtr

or where i can find info of sizes what parts 350 engine uses

Re: 350 tpi building
 

can is use original lenght rockers pushrod with 1.6 rockers? And how much hp i will get with 1.6 rockers?
how tight i must heads cover wrench? i scare i turn over and then is thread is down and heads runed