Third Generation F-Body Message Boards

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)
-   TPI (https://www.thirdgen.org/forums/tpi/)
-   -   Vapor canister purge solenoid for 92' 5.0 TPI (https://www.thirdgen.org/forums/tpi/694844-vapor-canister-purge-solenoid.html)

MeenZ28 01-06-2014 03:27 PM

Vapor canister purge solenoid for 92' 5.0 TPI
 
Where can you buy a replacement? I've looked everywhere and can only seem to find the entire canister. The one Rockauto shows is wrong. Can you just buy the solenoid or am I stuck buying the whole canister with it?

Should look like this ----
http://i.ebayimg.com/t/82-92-Camaro-...SwyIo/$_57.JPG

Tuned Performance 01-06-2014 03:59 PM

Re: Vapor canister purge solenoid for 92' 5.0 TPI
 
its built into the canister !

MeenZ28 01-06-2014 04:51 PM

Re: Vapor canister purge solenoid for 92' 5.0 TPI
 
No it's not. I took mine out....

Tuned Performance 01-06-2014 05:07 PM

Re: Vapor canister purge solenoid for 92' 5.0 TPI
 
Have you contacted your local gm dealer to see if its sold separately from the gm 17092109 acdelco 215-163 ?
You may compare a acdelco 214-619 and see if that matches.

1991vortech335 09-14-2018 07:50 AM

Re: Vapor canister purge solenoid for 92' 5.0 TPI
 
I know this this is an older thread but you can find the purge valve still available at Summit. I’m desperately searching for the whole canister and cannot find one anywhere. If you might know of a spot to order from I would be very grateful!



Originally Posted by MeenZ28 (Post 5693415)
Where can you buy a replacement? I've looked everywhere and can only seem to find the entire canister. The one Rockauto shows is wrong. Can you just buy the solenoid or am I stuck buying the whole canister with it?

Should look like this ----
[IMG]http://i.ebayimg.com/t/82-92-Camaro-Charcoal-Vapor-Smog-Emissions-Canister-17088067LF-350-TPI-GM-SBC-/00/s/OTYwWDEyODA=/z/L6sAAOxyVaBSwyIo/$_57.JPG


ULTM8Z 09-14-2018 10:10 AM

Re: Vapor canister purge solenoid for 92' 5.0 TPI
 
if you can't find the exact part and aren't overly concerned with originality, you can always get a generic and make it work. the solenoid itself is nothing special... just need to open and close with a 12v signal. something like this can be mounted somewhere off the canister and then plumbed and wired in.

https://www.ebay.com/p/A-c-2-Port-Vacuum-12-Volt-Solenoid-Shut-off-Valve-959001-Normally-Closed/1658786138?iid=401283832888

Pro 09-14-2018 05:46 PM

Re: Vapor canister purge solenoid for 92' 5.0 TPI
 
No need for that. The truck ones plug right in
https://www.autozone.com/engine-mana.../45380_0_12209


All times are GMT -5. The time now is 04:33 AM.


© 2024 MH Sub I, LLC dba Internet Brands