Third Generation F-Body Message Boards - Code 24 w/ Autometer setup

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)

- TPI (https://www.thirdgen.org/forums/tpi/)

- - Code 24 w/ Autometer setup (https://www.thirdgen.org/forums/tpi/717877-code-24-w-autometer.html)

penguinpanda0

04-15-2015 08:14 PM

Code 24 w/ Autometer setup

Car is an 87 iroc lb9 700r4 with cable driven speedometer. I'm getting code 24 because I have no speedometer (I am converting to autometer), wondering if its possible to run an autometer speedometer without triggering code 24 & if so what else do I need besides the speedometer itself?

86Z	04-16-2015 02:57 PM

Re: Code 24 w/ Autometer setup

anything is possible, you will need an electronic speed signal from the transmission you may need to go in to a dakota sgi box to output 2k pulse signal to the computer and a pulse to the electric speedometer.

penguinpanda0

05-22-2015 11:23 AM

Re: Code 24 w/ Autometer setup

Would I be better off ditching the cable setup and switch to electric signal? Is this

http://www.dakotadigital.com/index.c...roduct_id=126/

the dakota box you were talking about?

All times are GMT -5. The time now is 07:23 PM.