Throttle body coolant bypass question
 

What's up guys I had a quick question I was going to do the tb bypass on my caresume but since I don't have the heater valve do I just plug the port on the Intake?
https://cimg0.ibsrv.net/gimg/www.thi...11464a1ad6.jpg

Re: Throttle body coolant bypass question
 

You don't plug the port on the intake manifold, that port is connected to the coolant send line that would normally route through the throttlebody which would be the line with the new hose clamp directly under the throttle positioning sensor in that picture you posted. you're just connecting the two lines with a fitting instead of connecting both lines to the throttle body.

Re: Throttle body coolant bypass question
 

Got it ok cause that line that goes into the tb comes from my radiator they cancelled the heater line and ran it from my radiator to the tb.