TPiS Mini Ram Porting and 113 heads. Doing a project for myself. '86 IROC with a '91 L98 engine. Decided to port the heads and use a mini ram. Converted the heads to 8mm 2.00/1.570 valves and used a LS drop in kit. Erson 226/234 camshaft. Should be a nice little fun ride! https://cimg2.ibsrv.net/gimg/www.thi...48f314b3b1.jpg https://cimg4.ibsrv.net/gimg/www.thi...3f83543476.jpg https://cimg2.ibsrv.net/gimg/www.thi...95f4822c3e.jpg https://cimg5.ibsrv.net/gimg/www.thi...a2208f28b6.jpg https://cimg9.ibsrv.net/gimg/www.thi...00277a43e6.jpg https://cimg1.ibsrv.net/gimg/www.thi...479164f307.jpg |
Re: TPiS Mini Ram Porting and 113 heads. Nice, did you get any b4/after numbers on any of it? I did a set of 113s almost 20yrs ago and we picked up 6/10ths in the 1/4 over the stock 87 350 iron heads. |
Re: TPiS Mini Ram Porting and 113 heads. Right off the car to the bench .100-.700 on 4.00 fixture Reworked with 2.00/1.570 .100-.900 on same fixture NO PIPE on either https://cimg7.ibsrv.net/gimg/www.thi...adc220b810.jpg https://cimg1.ibsrv.net/gimg/www.thi...089dc9d8f6.jpg |
Re: TPiS Mini Ram Porting and 113 heads. Nice! I'm sure they will be fun! Is your portwork able to be purchased? |
Re: TPiS Mini Ram Porting and 113 heads. sure, it's what I do for a living. |
Re: TPiS Mini Ram Porting and 113 heads. |
Re: TPiS Mini Ram Porting and 113 heads. Thought I'd heard the name b4, just making sure. I'll PM you |
Re: TPiS Mini Ram Porting and 113 heads.
Originally Posted by TTOP350
(Post 6263837)
Thought I'd heard the name b4, just making sure. I'll PM you this combo is gonna make some good steam |
Re: TPiS Mini Ram Porting and 113 heads. What is this LS drop in kit you speak of? |
Re: TPiS Mini Ram Porting and 113 heads.
Originally Posted by Mongoose
(Post 6263900)
What is this LS drop in kit you speak of? https://cimg4.ibsrv.net/gimg/www.thi...0901ace769.jpg |
Re: TPiS Mini Ram Porting and 113 heads. I cut the factory .557 steel liner down to a .500 OD seal and used a Rapid 8mm guide liner. https://cimg7.ibsrv.net/gimg/www.thi...1a80bee651.jpg |
Re: TPiS Mini Ram Porting and 113 heads. |
Re: TPiS Mini Ram Porting and 113 heads. How much does that texture on the intake side help? Never seen it before. You still post on the bullet? |
Re: TPiS Mini Ram Porting and 113 heads. Looking forward to seeing updates! Seems like this is going to be a pretty sweet little setup. Did you port to a 1205 gasket? |
Re: TPiS Mini Ram Porting and 113 heads.
Originally Posted by RS Chris
(Post 6264910)
How much does that texture on the intake side help? Never seen it before. You still post on the bullet? texture is voodoo.. ;) |
Re: TPiS Mini Ram Porting and 113 heads.
Originally Posted by Bullydawg
(Post 6264948)
Looking forward to seeing updates! Seems like this is going to be a pretty sweet little setup. Did you port to a 1205 gasket? |
Re: TPiS Mini Ram Porting and 113 heads. |
Re: TPiS Mini Ram Porting and 113 heads. Chad, did you happen to get my PM? |
Re: TPiS Mini Ram Porting and 113 heads. Need some nice weather and a dyno. Also need a lift to finish the exhaust and put a new muffler on it. |
Re: TPiS Mini Ram Porting and 113 heads. That is one clean ride Chad. |
Re: TPiS Mini Ram Porting and 113 heads.
Originally Posted by RS Chris
(Post 6275172)
That is one clean ride Chad. |
Re: TPiS Mini Ram Porting and 113 heads. |
Re: TPiS Mini Ram Porting and 113 heads. How would these heads compare in cost and performance to a set of AFR heads, etc? I'm just curious. GD |
Re: TPiS Mini Ram Porting and 113 heads. https://cimg3.ibsrv.net/gimg/www.thi...dfe83e063.jpeg @Gd here is the flow numbers on a set of 128s I have that were changed from square port exhaust to d port. I’m sure the 113s ported here flow more. https://www.thirdgen.org/forums/engi...113-heads.html @chad what lift are you at , just curious how much lift you can get with the 113s and your springs. sorry missed post 3 |
Re: TPiS Mini Ram Porting and 113 heads.
Originally Posted by GeneralDisorder
(Post 6285984)
How would these heads compare in cost and performance to a set of AFR heads, etc? I'm just curious. GD |
Re: TPiS Mini Ram Porting and 113 heads.
Originally Posted by Tuned Performance
(Post 6285989)
https://cimg3.ibsrv.net/gimg/www.thi...dfe83e063.jpeg @Gd here is the flow numbers on a set of 128s I have that were changed from square port exhaust to d port. I’m sure the 113s ported here flow more. https://www.thirdgen.org/forums/engi...113-heads.html @chad what lift are you at , just curious how much lift you can get with the 113s and your springs. sorry missed post 3 |
All times are GMT -5. The time now is 01:25 AM. |
© 2024 MH Sub I, LLC dba Internet Brands