Third Generation F-Body Message Boards

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)
-   Transmissions and Drivetrain (https://www.thirdgen.org/forums/transmissions-drivetrain/)
-   -   I Need Help Finding A Speed Sensor (https://www.thirdgen.org/forums/transmissions-drivetrain/378772-i-need-help-finding.html)

Procharged GTA 07-24-2006 06:34 PM

I Need Help Finding A Speed Sensor
 
Hi we are needing help finding a speed sensor that will work with my combo.My dad has an '86 Trans Am that originally had a TPI 305 and a 700-R4 transmission. The car now has a Carbureted 383 with a 200-4R trans mission. The 700-R4 had a 2-wire speed sensor that ran his speedometer,the 200-4R was built for a cable ran speedomter. We need to find out what sensor we need that will fit the 200-4R, that has the 2 wire hook-up to work with the factory speedometer. I know the '89 Turbo Trans Am came from the factory with the 200-4R transmission,but I don't know what they used to run the speedometer. Can somebody help us? The help would be greatly appriciated,Brian

Procharged GTA 07-24-2006 07:17 PM

just wanted to add that the dash is NOT a digital numbered dash,everything has hands like a normal dash,it just gets an electronic signal from the speed sensor through a buffer box located under the dash.

coolguywalt 07-24-2006 07:36 PM

Go to the parts store and order one for a 1989 Turbo Trans Am. They had the buick 2004R tranny w/ the electronic speed sensor. Kinda pricey, though. Hope that helps.

Walt

Procharged GTA 07-24-2006 08:05 PM

thanks for the quick responce coolguy,does anybody know what part # i would need?I tried to get my local Oreilley to find it for me in the past,but they don't know what I'm talking about.

Dyno Don 07-24-2006 08:37 PM

If that doesn't work, get an aftermarket unit for a cable that produces a 2000 pulse per mile signal. Painless has them, as does Turbo City.
It goes between the trans drive and the speedo cable and has two wires that go to the speed buffer (the other end can go nowhere it doesn't matter, since you don't have a cable).

hotrodln 07-24-2006 08:58 PM

The folks at Dakota digital are also quite good with various conversions....look them up online and then give them acall and explain your needs........i'll bet they can send you something..........

coolguywalt 07-24-2006 10:38 PM

GP Sorensen #7799505 $58.99 not bad, just reuse your stock driven gear and you should be fine


All times are GMT -5. The time now is 02:40 PM.


© 2024 MH Sub I, LLC dba Internet Brands