Third Generation F-Body Message Boards

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)

- Transmissions and Drivetrain (https://www.thirdgen.org/forums/transmissions-drivetrain/)

- - changing diffs (https://www.thirdgen.org/forums/transmissions-drivetrain/668593-changing-diffs.html)

I am changing my 88 drum brake diff to a disc brake. I bought a used one but just to check can someone tell me if it is a Saginaw or Borg Warner difff? I can only find the main number on the outside main housing that reads 22522676 with the other number K2. I do not find the other number that someone was mentioning that is located on the axle tube. I was told to get an aluminum rear plate with 2 rods attached in the inside to hold it better. This is for the seal. How can I tell what this 10 bolt rear is? Sorry about being vague but it is 4:00 in the morning here in Australia but I had to know. thanks for the help.

Re: changing diffs

Quote:

Originally Posted by yankeecarman (Post 5441714)

How can I tell what this 10 bolt rear is?

Check the 10-Bolt FAQ sticky at the top of the page.

JamesC