Stock Servo Removal and Replacement
 

Hey guys, I'm hung up on something here. I'm in the middle of removing my stock 2-4 piston in my 700r4, and I can't get the 2nd piston out. I've removed the cover, and the first plate that comes out easily. Then, I removed the E-clip at the end of the pin, and the washer and spring. So, now I'm looking at the pin (which is easily depressed) and the rest of the assembly. But it doesn't want to move at all. It spins a bit, but there's no motion of the assembly to leave the tranny. Am I missing something?

Re: Stock Servo Removal and Replacement
 

Never mind boys, got 'er figured. Just took a bit more muscle than I expected.

Re: Stock Servo Removal and Replacement
 

84 if you have any pictures of your project post them on here.

Re: Stock Servo Removal and Replacement
 

I will, I have lots. So I've got one more hang up with this servo replacement, the cover is a real pain to get back in and secured with the retaining ring. I know it's possible, might need a friend to hold the cover in while I put the ring on. Not enough hands to do everything!