Third Generation F-Body Message Boards

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)
-   Transmissions and Drivetrain (https://www.thirdgen.org/forums/transmissions-drivetrain/)
-   -   cross member for the 4l80e in a 3rd gen camaro (https://www.thirdgen.org/forums/transmissions-drivetrain/696098-cross-member-4l80e-3rd.html)

86mailman 01-29-2014 06:56 PM
cross member for the 4l80e in a 3rd gen camaro
 
I am putting a 4l80e in my 86 iroc. Does anyone offer a cross member and/or the relocation bracket for the torque arm for the 4l80e swap in a 3rd gen?

92RS_Ttop 01-29-2014 07:13 PM
Re: cross member for the 4l80e in a 3rd gen camaro
 
You should be able to use a regular automatic trans crossmember with the 4L80e. They are the same externally as a 700r4 IIRC. There are several aftermarket torque arm relocation kits out there available from the site sponsors or Summit/Jegs.

88gunmetalgta 01-29-2014 07:27 PM
Re: cross member for the 4l80e in a 3rd gen camaro
 
^ You're thinking 60E.

Bmr used to make a swap crossmember but its now discontinued and from what I hear it fit like sh1t anyway. You're in for some fab work. The Trans Mount is behind the point where the factory subframes end.

92RS_Ttop 01-29-2014 08:15 PM
Re: cross member for the 4l80e in a 3rd gen camaro
 
Originally Posted by 88gunmetalgta (Post 5706687)
^ You're thinking 60E.

Bmr used to make a swap crossmember but its now discontinued and from what I hear it fit like sh1t anyway. You're in for some fab work. The Trans Mount is behind the point where the factory subframes end.
You're right, I was thinking of the 4L60e, not the 80:doh:


All times are GMT -5. The time now is 07:53 AM.


© 2024 MH Sub I, LLC dba Internet Brands