2.73 open to 3.42 posi I have an 83 z28 with LG4 305 700r4 and 2.73 open rear end. I purchased a used 3.42 drum brake posi off hawks website (hard to find in New Orleans). Im running 20" iroc wheels with 245 tires and my speedo is off about 4mph. With this 3.42 rear end will any other changes need to be done like stall torque converter? With the speedo being 4mph lower with the wheels will the 3.42 will bring speedo to normal? I wanted a posi unit for my future ls1/t56 swap that I keep pushing off. I know they don't hold up well to power. What kind of improvement should I expect to see in performance? Will it be noticeable? Thanks Randy |
Re: 2.73 open to 3.42 posi You will feel quicker acceleration. Your speedometer will be off even more than it is now. No need for a torque converter change. You didn't say what year the rear end is from, so it could have either 26 or 28 spline axles in it. If this is another 3rd gen rear end then the "posi" is probably going to be an Auburn. It may last a while, or it may already be worn out. It's not a good idea to buy a used Auburn, or even a new Auburn as far as that goes. You may find yourself changing the differential in the near future. If you do then do not buy another Auburn. Get an Eaton or a Yukon. |
Re: 2.73 open to 3.42 posi
Originally Posted by randallp504
(Post 6232363)
I have an 83 z28 with LG4 305 700r4 and 2.73 open rear end. I purchased a used 3.42 drum brake posi off hawks website (hard to find in New Orleans). Im running 20" iroc wheels with 245 tires and my speedo is off about 4mph. With this 3.42 rear end will any other changes need to be done like stall torque converter? With the speedo being 4mph lower with the wheels will the 3.42 will bring speedo to normal? I wanted a posi unit for my future ls1/t56 swap that I keep pushing off. I know they don't hold up well to power. What kind of improvement should I expect to see in performance? Will it be noticeable? Thanks Randy Yeah, your speedo will be way off in the opposite direction, and if like mine it will be more than 4 mph and it will change as you go faster. I have 3:42 posi with 19" vette wheels and 35 tire wall.My car was a 2:73 original also. I am about 5 mph faster @ 45mph. At 72 mph I read 80 on the speedo. Your 20" rim may give you a little different reading on the speedo. |
Re: 2.73 open to 3.42 posi Thanks for the reply’s. Any idea what you’re taching on highway? As far as it being an auburn. It’s a pull out rear end, they said they spin it with something and listen for any play or whining, then pull cover and inspect. Fingers crossed! |
Re: 2.73 open to 3.42 posi
Originally Posted by randallp504
(Post 6232423)
Thanks for the reply’s. Any idea what you’re taching on highway? As far as it being an auburn. It’s a pull out rear end, they said they spin it with something and listen for any play or whining, then pull cover and inspect. Fingers crossed! At 72mph (actual speed) around 2600-2700. At 80 mph (actual speed) around 3K |
Re: 2.73 open to 3.42 posi If it starts spinning one tire then you know it's shot. Hopefully it will last a long time. Just don't do any burnouts while holding the brake. |
Re: 2.73 open to 3.42 posi Thanks guys cant wait. |
Re: 2.73 open to 3.42 posi
Originally Posted by big gear head
(Post 6232485)
If it starts spinning one tire then you know it's shot. Hopefully it will last a long time. Just don't do any burnouts while holding the brake. https://cimg7.ibsrv.net/gimg/www.thi...f9b816950f.jpg |
Re: 2.73 open to 3.42 posi Even a tired old 305 will bust these things? I hope it holds up. I can do a decent one wheel peel in my car now with the 2.73, hopefully I maybe able to roast both. |
Re: 2.73 open to 3.42 posi
Originally Posted by randallp504
(Post 6232363)
I have an 83 z28 with LG4 305 700r4 and 2.73 open rear end. I purchased a used 3.42 drum brake posi off hawks website (hard to find in New Orleans). Im running 20" iroc wheels with 245 tires and my speedo is off about 4mph. With this 3.42 rear end will any other changes need to be done like stall torque converter? With the speedo being 4mph lower with the wheels will the 3.42 will bring speedo to normal? I wanted a posi unit for my future ls1/t56 swap that I keep pushing off. I know they don't hold up well to power. What kind of improvement should I expect to see in performance? Will it be noticeable? Thanks Randy I’m swapping a T56 in my car, and need to find an inexpensive 3.42 axle. I can’t afford a 3k new differential at the same time I’m spending for the T56. |
Re: 2.73 open to 3.42 posi 300$ then $125 shipped to New Orleans. I did an online order and had problems with them charging me twice, but I have it on the crate on my trailer ready to go in. But I would call if you want to get one. They had to check to see if the had the 3.42 posi drum brake even though I already paid. They pull them out of parts cars test them and then ship. No warranty whatsoever. I looked forever in my area with no luck. So it was worth the money(if it performs and holds up). I have everything to do an ls1/t56 swap, just don’t have a garage to take my time and do it perfect and properly. Randy |
Re: 2.73 open to 3.42 posi Thanks..I live close to Hawks, and could pick up the differential directly from them. Thanks for the info! I lived in your area in the mid 80’s, on the Westbank, off of Lapalco, and Wall. I used to be a Kmart manager for the Harvey store on the Westbank Expressway, next to the Harvey Canal. |
Re: 2.73 open to 3.42 posi
Originally Posted by Galaxie500XL
(Post 6235522)
Thanks..I live close to Hawks, and could pick up the differential directly from them. Thanks for the info! I lived in your area in the mid 80’s, on the Westbank, off of Lapalco, and Wall. I used to be a Kmart manager for the Harvey store on the Westbank Expressway, next to the Harvey Canal. I missed out by 3 days, hawks had a 20% off going on. Not sure if the diff would have qualified but woulda been sweet. |
Re: 2.73 open to 3.42 posi You can use this program to figure out you speedo gear. (http://www.bgsoflex.com/speedo1.html ) Then order your gears here; (https://www.transmissioncenter.com/s...4-driven-gear/ ) |
All times are GMT -5. The time now is 07:28 PM. |
© 2024 MH Sub I, LLC dba Internet Brands