Aftermarket 28 Spline Axle Shafts 10 Bolt? Anyone have any suggestions for new axle shafts that fit the 3rd gen rear 10 bolt? Have a 26 spline car that needs a posi installed so rather just buy a 28 spline and upgrade it all. |
Re: Aftermarket 28 Spline Axle Shafts 10 Bolt? I used a set by Alloy. Good quality, used press in or screw in studs, but didn't work directly with the torsen posi I was using |
Re: Aftermarket 28 Spline Axle Shafts 10 Bolt? A replacement axle for a '90 to '92 3rd gen should work fine. Moser, Yukon or others should have them. |
Re: Aftermarket 28 Spline Axle Shafts 10 Bolt? I'll see what I can find under those brands and post them here, if anyone has some links let me know as well. |
Re: Aftermarket 28 Spline Axle Shafts 10 Bolt? https://www.summitracing.com/parts/a...t/model/camaro This seems to be a nice bet. |
Re: Aftermarket 28 Spline Axle Shafts 10 Bolt? I used these on my 26 to 28 spline conversion https://www.summitracing.com/parts/sum-700118 I had issues with my factory rotors not fitting on the ends I had to have them turned down about 0.3" |
All times are GMT -5. The time now is 06:07 AM. |
© 2024 MH Sub I, LLC dba Internet Brands