Third Generation F-Body Message Boards - Slave cylinder mounting bolt size?

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)

- Transmissions and Drivetrain (https://www.thirdgen.org/forums/transmissions-drivetrain/)

- - Slave cylinder mounting bolt size? (https://www.thirdgen.org/forums/transmissions-drivetrain/758482-slave-cylinder-mounting-bolt.html)

Rwright97

01-14-2019 04:00 PM

Slave cylinder mounting bolt size?

Does amybody know the bolt dimensions to the slave cylinder mounting bolts? Also is it just two bolts holding it in or a nut on the ends aswell?

jmd	01-14-2019 10:22 PM

Re: Slave cylinder mounting bolt size?

The 84-02 bolt was shaped like a U with threaded ends. Inside the cabin, locking nuts M8 X 1.25 retained it.

//<86TA>\\

01-15-2019 04:45 AM

Re: Slave cylinder mounting bolt size?

That's the master though, the slave is held to the bellhousibg with 2 bolts and nuts.

Drew	01-15-2019 06:58 PM

Re: Slave cylinder mounting bolt size?

The nuts are welded to the heatshield. Sure they're metric, probably a M6 or M8.

Dyno Don

01-15-2019 07:56 PM

Re: Slave cylinder mounting bolt size?

m8 x 45mm

All times are GMT -5. The time now is 11:26 PM.