9-bolt Yoke vs 10-bolt Yoke Hello, Just gone done swapping the old 10-bolt to an older 9-bolt Rear-End, into a 91-Z28, 350-TPI, Auto Trans. The entire swap is complete, with the exception of a problem I run into. The u-joint strap bolts from the old 10-bolt don't seem to fit the 9-bolt yoke, and I ended up breaking one of the bolts, and the broken bolt is stuck inside the Yoke. Are the yokes different between the 10-bolt and 9-bolt rear ends? I searched through older threads and cannot find any info on this. As my last resort, I will have to remove the yoke, take it to a machine shop to get the bolt holes re-machined, and re-assemble. Are procedures for 9-bolt yoke removal and re-installation the same as a 10-bolt? Thank for any help. |
Re: 9-bolt Yoke vs 10-bolt Yoke The yokes are not the same. Yes, remove and install should be the same. |
Re: 9-bolt Yoke vs 10-bolt Yoke Thank You! |
All times are GMT -5. The time now is 03:12 PM. |
© 2024 MH Sub I, LLC dba Internet Brands