Canvas cargo cover?
#1
Member
Thread Starter
iTrader: (4)
Join Date: Dec 2005
Location: Bay Area, CA
Posts: 207
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Camaro Z28
Engine: Roller 350
Transmission: T-5
Axle/Gears: built ten bolt 3.73's
Canvas cargo cover?
While on a trip to the local bone yard I came across something kind of odd. While scouring the newly intered shells there was an '86 firebird with the pullout cargo cover, I am missing mine to my camaro. However everyone I seem to find is vynl based and the rod is bent. This one in the car was made of canvas. Just how rare is that? I ended up buying it for $6 on half off day yesterday. I would like to know if this was an aftermarket item or an option. regardless it is going into my car because it is definitely different looking. I would have searched before asking, but as we know the site is stilling be worked on. Thanks!
-Smalltires
-Smalltires
#2
Senior Member
iTrader: (5)
Join Date: Jul 2005
Location: Toronto,Ontario
Posts: 637
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 IROC-Z
Engine: 346 LS6
Transmission: T56
Axle/Gears: Hybrid 8.8 3.73
From 82 to 90 all pull out shades were canvas factory. only in 91 and 92 were they vinyl factory.
It is 82 to 90 factory option equipment.
speed
It is 82 to 90 factory option equipment.
speed
#3
Senior Member
Join Date: Oct 2004
Location: Moreno Valley, CA
Posts: 748
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 Camaro RS
Engine: 305 TBI (L03)
Transmission: 700R4 (MD8)
Axle/Gears: 2.73 Open (GU2)
I have the canvas and it sucks because before I got the windows tinted, it turned all purple/pink from the sun fading it.
I've never seen that problem with the vinyl ones in the j/y
I've never seen that problem with the vinyl ones in the j/y
#4
Senior Member
iTrader: (5)
Join Date: Jul 2005
Location: Toronto,Ontario
Posts: 637
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 IROC-Z
Engine: 346 LS6
Transmission: T56
Axle/Gears: Hybrid 8.8 3.73
The vinyl ones fade just as bad if not worse.
Personally id would go with canvas. it looks nicer
speed
Personally id would go with canvas. it looks nicer
speed
#5
Supreme Member
iTrader: (21)
Join Date: Dec 2005
Posts: 4,075
Likes: 0
Received 1 Like
on
1 Post
Car: 04 Silverado
Engine: 4.8
Transmission: auto
I have a vinyl one in my 85, don't know if it is factory but I am pretty sure it is. I bought a cloth one because my rod was broken and I was able to take the end cap off and replace the cloth with the vinyl and put it back together. I have the cloth one if anyone needs a good replacement.
#6
Member
Join Date: Dec 2000
Location: Chesterfield, VA
Posts: 408
Likes: 0
Received 0 Likes
on
0 Posts
Car: '86 IROC, black and sharp
Engine: 305 tpi, bone stock
Transmission: 700r4
Axle/Gears: 3.42 pos w/rear db
black 86 IROC - black vinyl, still nice and shiny after all these years when cleaned and "black magic'd" regularly
red 86 IROC - not sure what it came with, it has one of those locking/flip open covers with the big bose speakers and amplifier in it (never saw one of those before)
red 83 Z28 - locking/flip covers
red 91 RS - semi faded black canvas roll up cover
blue 88 Formula - semi faded black canvas roll up cover
red 86 IROC - not sure what it came with, it has one of those locking/flip open covers with the big bose speakers and amplifier in it (never saw one of those before)
red 83 Z28 - locking/flip covers
red 91 RS - semi faded black canvas roll up cover
blue 88 Formula - semi faded black canvas roll up cover
#7
Supreme Member
iTrader: (21)
Join Date: Dec 2005
Posts: 4,075
Likes: 0
Received 1 Like
on
1 Post
Car: 04 Silverado
Engine: 4.8
Transmission: auto
Originally Posted by speedmachine
From 82 to 90 all pull out shades were canvas factory. only in 91 and 92 were they vinyl factory.
It is 82 to 90 factory option equipment.
speed
It is 82 to 90 factory option equipment.
speed
Trending Topics
#8
Member
Join Date: May 2000
Location: Chilliwack, BC
Posts: 415
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro RS
Engine: 5.7 V8 TPI
Transmission: T-5 5-Speed Manual
My 87 Sport Coupe came with a vinyl roll shade. I'm 99% sure it was factory original as my parents bought the car in 89.
I too swapped the vinyl on to a working canvas one, but alas it too has failed
I too swapped the vinyl on to a working canvas one, but alas it too has failed
#9
Supreme Member
iTrader: (21)
Join Date: Dec 2005
Posts: 4,075
Likes: 0
Received 1 Like
on
1 Post
Car: 04 Silverado
Engine: 4.8
Transmission: auto
They are nice to have but a PITA because they won't roll up, I have to roll it up manually while I am closing the hatch and by the time I am ready to shut the hatch the darn shade falls from the clips that hold it up
#10
Supreme Member
iTrader: (1)
Join Date: Mar 2003
Location: Gladstone, Missouri
Posts: 1,149
Likes: 0
Received 1 Like
on
1 Post
Car: 91 Camaro RS
Engine: 5.0L TBI (ebl inside)
Transmission: T-5
Axle/Gears: 3.42 lsd 10 bolt
My 1991 has a canvus one. It was faded to almost a complete purple color when I finally used Dupli- color's vinyl and fabric coating in flat black. It now looks almost new.
#11
Supreme Member
iTrader: (21)
Join Date: Dec 2005
Posts: 4,075
Likes: 0
Received 1 Like
on
1 Post
Car: 04 Silverado
Engine: 4.8
Transmission: auto
Originally Posted by Gladstoneiroc
My 1991 has a canvus one. It was faded to almost a complete purple color when I finally used Dupli- color's vinyl and fabric coating in flat black. It now looks almost new.
#12
Supreme Member
Join Date: Jul 1999
Location: Alberta, Canada
Posts: 1,453
Likes: 0
Received 57 Likes
on
31 Posts
Car: 1989 Camaro-1LE
Engine: TPI(s)
Transmission: 5 speed (MM5, MK6)
Axle/Gears: 3.45, 3.73
Re: Canvas cargo cover?
Bringing this one back ... from our reference cars ... When did the cars come with Canvas vs. Vinyl roll away covers? This is option code D42 Rear Compartment Security Cover. I'm looking to restore my 89 with the correct one .. I have both.
Mark.
Mark.
#14
Supreme Member
iTrader: (2)
Join Date: Apr 2000
Location: South Windsor, CT
Posts: 1,261
Likes: 0
Received 212 Likes
on
178 Posts
Car: '89 GTA
Engine: ZZ6TPI
Transmission: T56
Axle/Gears: Borg Warner 3.70:1
Re: Canvas cargo cover?
My 89’ had a fabric cover when I purchased the car in 1999. Don’t know if it was original. I swapped it out to a vinyl cover from an 84’
#15
Supreme Member
iTrader: (11)
Join Date: Aug 2013
Location: MICHIGAN
Posts: 4,635
Received 751 Likes
on
577 Posts
Car: 1988 Trans Am
Engine: L03
Transmission: 700R4
Axle/Gears: 10 Bolt 2.73 Open
Re: Canvas cargo cover?
My '88 T/A was a one owner, 50k mile car when I bought it. All original except for the battery and alternator, as gar as I know. It has a vinyl cargo cover.
#16
Supreme Member
iTrader: (5)
Join Date: Oct 2002
Location: In the paint booth!
Posts: 2,656
Received 1,160 Likes
on
653 Posts
Car: 1986 Camaro Drag Car
Engine: 383 on Ethanol
Transmission: Automatic
Axle/Gears: 3.90 Currie 9 inch
Re: Canvas cargo cover?
My 1990 has a canvas and so does my 1991 parts car
#18
Moderator
Join Date: Mar 2001
Location: Doghouse ······································ Car: 1989 Formula 350 Vert Engine: 350 L98 Transmission: 700R4 Axle/Gears: B&W 3.27
Posts: 14,235
Received 163 Likes
on
118 Posts
Car: 87 Formula T-Top, 87 Formula HT
Engine: 5.1L TPI, 5.0L TPI
Transmission: 700R4, M5
Axle/Gears: Sag 3.73, B&W 3.45
Re: Canvas cargo cover?
From what I have seen 82-90 were Vinyl, the Canvas were the 91-92 and the Canvas shades were used as replacement parts. Keep in mind they had one part number in 1992 parts catalog - 10094972, I think even the "OER" that Classic Industries sells is the Canvas...
I would be interested to see if anyone has a 1989 Parts catalog if it had a different part number.
I would think part of the reason for the change was a minimal amount of weight savings, as unbelievable as that may seem.
John
I would be interested to see if anyone has a 1989 Parts catalog if it had a different part number.
I would think part of the reason for the change was a minimal amount of weight savings, as unbelievable as that may seem.
John
#20
Supreme Member
iTrader: (2)
Join Date: Apr 2000
Location: South Windsor, CT
Posts: 1,261
Likes: 0
Received 212 Likes
on
178 Posts
Car: '89 GTA
Engine: ZZ6TPI
Transmission: T56
Axle/Gears: Borg Warner 3.70:1
Re: Canvas cargo cover?
From what I have seen 82-90 were Vinyl, the Canvas were the 91-92 and the Canvas shades were used as replacement parts. Keep in mind they had one part number in 1992 parts catalog - 10094972, I think even the "OER" that Classic Industries sells is the Canvas...
I would be interested to see if anyone has a 1989 Parts catalog if it had a different part number.
I would think part of the reason for the change was a minimal amount of weight savings, as unbelievable as that may seem.
John
I would be interested to see if anyone has a 1989 Parts catalog if it had a different part number.
I would think part of the reason for the change was a minimal amount of weight savings, as unbelievable as that may seem.
John
Weight savings could have been the reason for the change, maybe cost or maybe reduced glare on the rear window.
The following users liked this post:
okfoz (07-26-2019)
Thread
Thread Starter
Forum
Replies
Last Post
skinny z
Engine/Drivetrain/Suspension Parts for Sale
5
10-05-2015 06:23 PM
Dragonsys
Engine/Drivetrain/Suspension Parts for Sale
2
09-25-2015 03:51 PM