History / Originality Got a question about 1982-1992 Camaro or Firebird history? Have a question about original parts, options, RPO codes, when something was available, or how to document your car? Those questions, answers, and much more!

My new 1990 G92, N10, DX3, 5 speed IROC-Z

Thread Tools
 
Search this Thread
 
Old 05-18-2019, 11:04 PM
  #1  
Supreme Member

Thread Starter
iTrader: (5)
 
dagwood's Avatar
 
Join Date: Oct 2002
Location: In the paint booth!
Posts: 2,656
Received 1,160 Likes on 653 Posts
Car: 1986 Camaro Drag Car
Engine: 383 on Ethanol
Transmission: Automatic
Axle/Gears: 3.90 Currie 9 inch
My new 1990 G92, N10, DX3, 5 speed IROC-Z

So, I sold my 82 Z28 to another member on this board, (socalkidd) and he flew in last night and paid for my Z28 and got to hang out with him and got to shoot the bull over some tasty brews. Super great dude. Thanks Jim......you bought a real gem!

Anyways, my new car got delivered this afternoon. It's a 1990 IROC-Z with 42k miles. It has the 230hp TPI 305, 5 speed, G92, N10, and decal and stripe delete DX3. It also has gray leather interior in near perfect condition. I got it from a couple in their early 80's who bought it new in Houston, TX where it spent its life until 6 years ago when they moved to South Dakota. The car is in GREAT shape. Zero rust, the doors open and close like new, everything works, etc. The hood has been painted at some point and doesn't match very good, so I will give that a fresh paint job. The car has had a bra on it its entire life, too, so I am going to give the nose a new paint job as well. (Its in perfect shape, but the paint is yellowing) It has never been in an accident, and no paint work other than the hood.

I found the car on the thread that rayjr started about the 5 speed third gens for sale. Thanks again rayjr for making a great thread!

Anyways, I'll get it washed up tomorrow and take some pics. Here it is when it got dropped off this afternoon!

Old 05-18-2019, 11:58 PM
  #2  
Supreme Member

iTrader: (4)
 
chazman's Avatar
 
Join Date: Dec 2001
Location: Chicagoland
Posts: 9,666
Received 546 Likes on 376 Posts
Car: 1989 IROC-Z. Original owner
Engine: LB9. Dual Cats. Big Cam
Transmission: World Class T-5
Axle/Gears: BW 3.45
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

Awesome! Welcome to the G92, 5 speed, N10, DX3 club! Congrats Darin!


And congrats to socalkidd for a great buy!
Old 05-19-2019, 05:04 AM
  #3  
Junior Member
 
Richardman1992's Avatar
 
Join Date: Oct 2017
Location: Davis County, Utah
Posts: 66
Received 5 Likes on 4 Posts
Car: 2021 LT1
Engine: Lt1
Transmission: Tr6060
Axle/Gears: 3.73
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

Nice car! What made you wanna sell your 82?
Old 05-19-2019, 07:29 AM
  #4  
Supreme Member

Thread Starter
iTrader: (5)
 
dagwood's Avatar
 
Join Date: Oct 2002
Location: In the paint booth!
Posts: 2,656
Received 1,160 Likes on 653 Posts
Car: 1986 Camaro Drag Car
Engine: 383 on Ethanol
Transmission: Automatic
Axle/Gears: 3.90 Currie 9 inch
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

Originally Posted by Richardman1992
Nice car! What made you wanna sell your 82?

Thanks! I didnt really WANT to sell the 82.....but he made me a really good offer on the car and I decided to pull the trigger and let it go. And the 82 was such a mint car that I really didn't enjoy driving it that much, i was always too paranoid that something was going to happen to it.
Old 05-19-2019, 07:48 AM
  #5  
Senior Member

 
LeonardS's Avatar
 
Join Date: Aug 2005
Location: Jamestown, ND
Posts: 781
Received 171 Likes on 106 Posts
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

Great looking car! I’m sure you’ll have it perfect in no time!
Old 05-19-2019, 08:58 AM
  #6  
Supreme Member

iTrader: (2)
 
dmccain's Avatar
 
Join Date: Mar 2014
Location: South Ms
Posts: 4,418
Received 721 Likes on 490 Posts
Car: 89 Firebird
Engine: 355 TBI
Transmission: 700R4
Axle/Gears: 10 Bolt.Posi-3.73s
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

I'm sure this one will be a blast to drive! Great score Darin on a gorgeous car.
Old 05-19-2019, 09:00 AM
  #7  
Supreme Member

Thread Starter
iTrader: (5)
 
dagwood's Avatar
 
Join Date: Oct 2002
Location: In the paint booth!
Posts: 2,656
Received 1,160 Likes on 653 Posts
Car: 1986 Camaro Drag Car
Engine: 383 on Ethanol
Transmission: Automatic
Axle/Gears: 3.90 Currie 9 inch
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

Thanks fellas!
Old 05-19-2019, 02:18 PM
  #8  
Member
iTrader: (4)
 
SirReveller's Avatar
 
Join Date: Aug 2017
Location: Toronto, ON
Posts: 477
Received 40 Likes on 31 Posts
Car: '89 'ROC
Engine: 5.7L
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

Nice score- congrats!!
Old 05-19-2019, 03:36 PM
  #9  
Supreme Member

 
burnout88's Avatar
 
Join Date: Nov 2003
Location: Somewhere
Posts: 1,629
Received 17 Likes on 10 Posts
Car: 88 IROC
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 10 bolt 3.73
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

Awesome car! All the best performance options. I know it’s a decal delete car but I think this car would look outstanding with the gray/yellow lower stripe and Iroc decals.
Old 05-19-2019, 05:04 PM
  #10  
Senior Member

iTrader: (4)
 
kentuckyKITT's Avatar
 
Join Date: Oct 2005
Location: KY
Posts: 854
Received 104 Likes on 76 Posts
Car: 3 T-Tops
Engine: 327/305/305
Transmission: TH350/700R4/700R4
Axle/Gears: 3:42/2:73
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

Nice, welcome to the 1990 club where we are few and far between!
Old 05-19-2019, 06:02 PM
  #11  
Supreme Member

Thread Starter
iTrader: (5)
 
dagwood's Avatar
 
Join Date: Oct 2002
Location: In the paint booth!
Posts: 2,656
Received 1,160 Likes on 653 Posts
Car: 1986 Camaro Drag Car
Engine: 383 on Ethanol
Transmission: Automatic
Axle/Gears: 3.90 Currie 9 inch
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

I've been working on it for a while this afternoon. I'm totally thrilled with the condition of this car. The only thing that doesn't work right is the radio. The speakers pop and crackle so I thought the speakers were blown, and pulled off the sail panel covers to find brand new Memphis audio speakers already in there. So I called the previous owner and he said the trouble is in the radio itself. They had the speakers replaced and nothing changed. He sent the radio somewhere to get repaired and they charged him $150 and didnt fix a thing.

Also I asked him why the hood had been painted and he said it was because the bra made the paint on the hood turn yellow under the bra......and the paint shop he took it to couldn't get a match. I went into work and pulled up the code, got out the variance chips and found a match right away, so I will have no trouble making this car perfect. Hopefully I can get the paint work done this week.

I am still debating on putting a decal kit on it.....and I think I'm going to after I get the paint stuff done and the car detailed.



Old 05-19-2019, 06:03 PM
  #12  
Supreme Member

Thread Starter
iTrader: (5)
 
dagwood's Avatar
 
Join Date: Oct 2002
Location: In the paint booth!
Posts: 2,656
Received 1,160 Likes on 653 Posts
Car: 1986 Camaro Drag Car
Engine: 383 on Ethanol
Transmission: Automatic
Axle/Gears: 3.90 Currie 9 inch
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

Oh and I need a new TUNED PORT INJECTION emblem for the rear bumper
Old 05-19-2019, 06:07 PM
  #13  
Member
iTrader: (4)
 
SirReveller's Avatar
 
Join Date: Aug 2017
Location: Toronto, ON
Posts: 477
Received 40 Likes on 31 Posts
Car: '89 'ROC
Engine: 5.7L
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

Cheapest I found was classic industries
Old 05-19-2019, 07:40 PM
  #14  
Member
 
IROCIN's Avatar
 
Join Date: Oct 2018
Location: Ft Wayne, IN
Posts: 238
Received 164 Likes on 92 Posts
Car: 1985 L69 Iroc/90 Iroc/99 Firehawk
Engine: L69/LB9/LS
Transmission: 5 spd/Auto/6 Spd
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

Very Nice! Congrats!
Old 05-19-2019, 09:24 PM
  #15  
Supreme Member

 
burnout88's Avatar
 
Join Date: Nov 2003
Location: Somewhere
Posts: 1,629
Received 17 Likes on 10 Posts
Car: 88 IROC
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 10 bolt 3.73
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

I just put in the retrosound radio and it sounds better then the old 1.5 din Pioneer I had in it and looks great also. The Bluetooth and iPhone control (limited) is a nice modern touch. I am actually enjoying the car a lot more. Install was a breeze.

https://www.camarocentral.com/1982_1..._p/das-704.htm
Old 05-19-2019, 09:32 PM
  #16  
Supreme Member

 
burnout88's Avatar
 
Join Date: Nov 2003
Location: Somewhere
Posts: 1,629
Received 17 Likes on 10 Posts
Car: 88 IROC
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 10 bolt 3.73
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

A set of those 17 x 9 hawks 88 to 90 rims would sure look sweet on this car also.

https://www.thirdgen.org/forums/whee...ls-coming.html

https://www.hawksmotorsports.com/88-...free-shipping/

Last edited by burnout88; 05-19-2019 at 09:36 PM.
Old 05-19-2019, 09:44 PM
  #17  
Supreme Member

Thread Starter
iTrader: (5)
 
dagwood's Avatar
 
Join Date: Oct 2002
Location: In the paint booth!
Posts: 2,656
Received 1,160 Likes on 653 Posts
Car: 1986 Camaro Drag Car
Engine: 383 on Ethanol
Transmission: Automatic
Axle/Gears: 3.90 Currie 9 inch
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

Oh yeah! Those wheels would look killer!
Old 05-19-2019, 10:05 PM
  #18  
Supreme Member

 
burnout88's Avatar
 
Join Date: Nov 2003
Location: Somewhere
Posts: 1,629
Received 17 Likes on 10 Posts
Car: 88 IROC
Engine: 305 TPI
Transmission: 700R4
Axle/Gears: 10 bolt 3.73
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

I know we are in the history section but I would also put a set of 1le brakes on the front and maybe even consider replicating a GM Players car decal set. I hate to say it’s just so tempting to autocross that car.
Old 05-19-2019, 10:59 PM
  #19  
Junior Member
 
Richardman1992's Avatar
 
Join Date: Oct 2017
Location: Davis County, Utah
Posts: 66
Received 5 Likes on 4 Posts
Car: 2021 LT1
Engine: Lt1
Transmission: Tr6060
Axle/Gears: 3.73
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

Imo go with the silver/gold decals like burnout posted ONLY because the car is white and plain. Any other color and I’d say leave it as-is with the DX3
Old 05-19-2019, 11:03 PM
  #20  
Supreme Member

Thread Starter
iTrader: (5)
 
dagwood's Avatar
 
Join Date: Oct 2002
Location: In the paint booth!
Posts: 2,656
Received 1,160 Likes on 653 Posts
Car: 1986 Camaro Drag Car
Engine: 383 on Ethanol
Transmission: Automatic
Axle/Gears: 3.90 Currie 9 inch
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

Originally Posted by Richardman1992
Imo go with the silver/gold decals like burnout posted ONLY because the car is white and plain. Any other color and I’d say leave it as-is with the DX3

I'm almost positive I'm going with the yellow and silver stripes like he posted earlier. I absolutely love that color scheme
Old 05-20-2019, 09:18 AM
  #21  
Supreme Member

iTrader: (4)
 
chazman's Avatar
 
Join Date: Dec 2001
Location: Chicagoland
Posts: 9,666
Received 546 Likes on 376 Posts
Car: 1989 IROC-Z. Original owner
Engine: LB9. Dual Cats. Big Cam
Transmission: World Class T-5
Axle/Gears: BW 3.45
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

I also love the yellow/silver stripe on a white car.
Old 05-20-2019, 12:51 PM
  #22  
Member
iTrader: (1)
 
irvan's Avatar
 
Join Date: Jun 2016
Location: Lawrence Kansas
Posts: 247
Received 38 Likes on 30 Posts
Car: 1989 IROC Z28
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z


I also am partial to the yellow/silver stripes. Good looking car, nice purchase.
Old 05-20-2019, 01:18 PM
  #23  
Supreme Member

iTrader: (4)
 
chazman's Avatar
 
Join Date: Dec 2001
Location: Chicagoland
Posts: 9,666
Received 546 Likes on 376 Posts
Car: 1989 IROC-Z. Original owner
Engine: LB9. Dual Cats. Big Cam
Transmission: World Class T-5
Axle/Gears: BW 3.45
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

Same here....





Old 05-20-2019, 01:50 PM
  #24  
Member
iTrader: (2)
 
mrestrictrplate's Avatar
 
Join Date: Nov 2013
Location: Freehold NJ
Posts: 297
Received 0 Likes on 0 Posts
Car: 87 Iroc 5.7,67 SS Camaro,90 Formula
Engine: 355 AFR Superram LPE 219
Transmission: 700r4 3000 stall 4spd 5 spd
Axle/Gears: 3.27
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

Buy an NOS tpi rear emblem. The GM licensed repro I bought has horrible spotty paing on the black part(underside of the letters...
Old 05-20-2019, 02:18 PM
  #25  
Supreme Member

iTrader: (4)
 
chazman's Avatar
 
Join Date: Dec 2001
Location: Chicagoland
Posts: 9,666
Received 546 Likes on 376 Posts
Car: 1989 IROC-Z. Original owner
Engine: LB9. Dual Cats. Big Cam
Transmission: World Class T-5
Axle/Gears: BW 3.45
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

Originally Posted by mrestrictrplate
Buy an NOS tpi rear emblem. The GM licensed repro I bought has horrible spotty paing on the black part(underside of the letters...


https://www.thirdgen.org/forums/hist...roduction.html
Old 05-20-2019, 05:28 PM
  #26  
Member
iTrader: (4)
 
SirReveller's Avatar
 
Join Date: Aug 2017
Location: Toronto, ON
Posts: 477
Received 40 Likes on 31 Posts
Car: '89 'ROC
Engine: 5.7L
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

Blue stripe with silver IROCs on doors would look cool on white.
Old 05-20-2019, 05:32 PM
  #27  
Supreme Member

Thread Starter
iTrader: (5)
 
dagwood's Avatar
 
Join Date: Oct 2002
Location: In the paint booth!
Posts: 2,656
Received 1,160 Likes on 653 Posts
Car: 1986 Camaro Drag Car
Engine: 383 on Ethanol
Transmission: Automatic
Axle/Gears: 3.90 Currie 9 inch
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

I'm not wasting any time! Car show this weekend.....and I absolutely couldn't deal with that hood being too bright any longer lol

I'll paint the nose a little later.....its not THAT bad...


Old 05-20-2019, 06:59 PM
  #28  
Supreme Member

Thread Starter
iTrader: (5)
 
dagwood's Avatar
 
Join Date: Oct 2002
Location: In the paint booth!
Posts: 2,656
Received 1,160 Likes on 653 Posts
Car: 1986 Camaro Drag Car
Engine: 383 on Ethanol
Transmission: Automatic
Axle/Gears: 3.90 Currie 9 inch
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

Old 05-20-2019, 07:01 PM
  #29  
Senior Member

 
LeonardS's Avatar
 
Join Date: Aug 2005
Location: Jamestown, ND
Posts: 781
Received 171 Likes on 106 Posts
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

Nice shine on it! A little clay bar and it will be perfect!!
Old 05-20-2019, 07:01 PM
  #30  
Supreme Member

Thread Starter
iTrader: (5)
 
dagwood's Avatar
 
Join Date: Oct 2002
Location: In the paint booth!
Posts: 2,656
Received 1,160 Likes on 653 Posts
Car: 1986 Camaro Drag Car
Engine: 383 on Ethanol
Transmission: Automatic
Axle/Gears: 3.90 Currie 9 inch
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

Hey Charlie.......I have something for ya!


Old 05-20-2019, 07:02 PM
  #31  
Supreme Member

Thread Starter
iTrader: (5)
 
dagwood's Avatar
 
Join Date: Oct 2002
Location: In the paint booth!
Posts: 2,656
Received 1,160 Likes on 653 Posts
Car: 1986 Camaro Drag Car
Engine: 383 on Ethanol
Transmission: Automatic
Axle/Gears: 3.90 Currie 9 inch
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

Originally Posted by LeonardS
Nice shine on it! A little clay bar and it will be perfect!!


I cant help but think about that 344 mile iroc every time I hear clay bar hehe

Last edited by dagwood; 05-21-2019 at 09:54 PM.
Old 05-20-2019, 07:52 PM
  #32  
Supreme Member

iTrader: (4)
 
chazman's Avatar
 
Join Date: Dec 2001
Location: Chicagoland
Posts: 9,666
Received 546 Likes on 376 Posts
Car: 1989 IROC-Z. Original owner
Engine: LB9. Dual Cats. Big Cam
Transmission: World Class T-5
Axle/Gears: BW 3.45
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

Originally Posted by dagwood
Hey Charlie.......I have something for ya!



Fantastic!
Old 05-20-2019, 09:03 PM
  #33  
Supreme Member
iTrader: (1)
 
88IROCvertZ's Avatar
 
Join Date: Mar 2016
Location: New England
Posts: 2,406
Received 190 Likes on 128 Posts
Car: 1988 IROC Z Convertible
Engine: 305 TPI (LB9)
Transmission: 700 R4
Axle/Gears: G80 GU2
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

Originally Posted by dagwood

Wow.. didn’t waste any time!

Great to hear the 82 went to a great place.. socalkid has a really nice IROC too if I recall..

I’m happy for everyone in this ThirdGen Shuffle..

Can’t wait to see the updated detailed pics... That interior looks awesome.

I vote for decals and stripes... It’s going to be so fun to cruise in..

congrats!

Last edited by 88IROCvertZ; 05-20-2019 at 10:03 PM.
Old 05-21-2019, 07:31 AM
  #34  
Member
 
Carlos89's Avatar
 
Join Date: Sep 2018
Location: Miami, FL
Posts: 170
Received 41 Likes on 29 Posts
Car: 1986 Trans Am
Engine: 5.0 LG4 4BBL
Transmission: T5 5-Speed
Axle/Gears: 3.23
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

Sweet man! My $0.02, keep it stripe-less. Looks smoooooth!
Old 05-21-2019, 09:30 AM
  #35  
Supreme Member

Thread Starter
iTrader: (5)
 
dagwood's Avatar
 
Join Date: Oct 2002
Location: In the paint booth!
Posts: 2,656
Received 1,160 Likes on 653 Posts
Car: 1986 Camaro Drag Car
Engine: 383 on Ethanol
Transmission: Automatic
Axle/Gears: 3.90 Currie 9 inch
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

All back together. I sanded and buffed the nose, too, and got almost all of the yellowing gone.




Old 05-21-2019, 09:33 AM
  #36  
Supreme Member

iTrader: (4)
 
chazman's Avatar
 
Join Date: Dec 2001
Location: Chicagoland
Posts: 9,666
Received 546 Likes on 376 Posts
Car: 1989 IROC-Z. Original owner
Engine: LB9. Dual Cats. Big Cam
Transmission: World Class T-5
Axle/Gears: BW 3.45
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

Man, you're fast!
Old 05-21-2019, 11:15 AM
  #37  
Supreme Member
iTrader: (1)
 
88IROCvertZ's Avatar
 
Join Date: Mar 2016
Location: New England
Posts: 2,406
Received 190 Likes on 128 Posts
Car: 1988 IROC Z Convertible
Engine: 305 TPI (LB9)
Transmission: 700 R4
Axle/Gears: G80 GU2
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

Looks really awesome! Stripes or no stripes.. either way.. once you got that bra off the car looks incredible
Old 05-21-2019, 09:43 PM
  #38  
Supreme Member

iTrader: (11)
 
DynoDave43's Avatar
 
Join Date: Aug 2013
Location: MICHIGAN
Posts: 4,636
Received 751 Likes on 577 Posts
Car: 1988 Trans Am
Engine: L03
Transmission: 700R4
Axle/Gears: 10 Bolt 2.73 Open
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

Originally Posted by burnout88
I just put in the retrosound radio and it sounds better then the old 1.5 din Pioneer I had in it and looks great also. The Bluetooth and iPhone control (limited) is a nice modern touch. I am actually enjoying the car a lot more. Install was a breeze.

https://www.camarocentral.com/1982_1..._p/das-704.htm
I wasn't originally a fan of these units, but someone posted a pic of theirs installed, and it looked pretty good. Not fooling anyone, but looks "right". And with modern electronics, it's going to be hard to resist.
Old 05-21-2019, 09:57 PM
  #39  
Supreme Member

Thread Starter
iTrader: (5)
 
dagwood's Avatar
 
Join Date: Oct 2002
Location: In the paint booth!
Posts: 2,656
Received 1,160 Likes on 653 Posts
Car: 1986 Camaro Drag Car
Engine: 383 on Ethanol
Transmission: Automatic
Axle/Gears: 3.90 Currie 9 inch
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

Originally Posted by 88IROCvertZ
Wow.. didn’t waste any time!

Great to hear the 82 went to a great place.. socalkid has a really nice IROC too if I recall..

I’m happy for everyone in this ThirdGen Shuffle..

Can’t wait to see the updated detailed pics... That interior looks awesome.

I vote for decals and stripes... It’s going to be so fun to cruise in..

congrats!

Yep, socalkidd has a killer, 23k mile 87 IROC-Z, G92, 5 speed. His garage is gonna be pretty awesome with the two sitting next to each other. The 82 is still in my garage. The shipping company is supposed to be picking it up this week, for it's long voyage to southern California

Last edited by dagwood; 05-21-2019 at 10:02 PM.
Old 05-21-2019, 10:07 PM
  #40  
Supreme Member

Thread Starter
iTrader: (5)
 
dagwood's Avatar
 
Join Date: Oct 2002
Location: In the paint booth!
Posts: 2,656
Received 1,160 Likes on 653 Posts
Car: 1986 Camaro Drag Car
Engine: 383 on Ethanol
Transmission: Automatic
Axle/Gears: 3.90 Currie 9 inch
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

I ordered a set of General G-MAX RS tires for the car tonight. I hope they're a good tire. It has a brand new set of Goodyear tires on it now, but they are going to go on my Dad's 1991 Trans Am convertible. The Goodyear's are a 225 60 16......so I'm putting 245 50 16's back on it. The Goodyear's are the stock size for the TA, and it needed tires anyways so it worked out good
Old 05-21-2019, 10:20 PM
  #41  
Supreme Member

iTrader: (11)
 
DynoDave43's Avatar
 
Join Date: Aug 2013
Location: MICHIGAN
Posts: 4,636
Received 751 Likes on 577 Posts
Car: 1988 Trans Am
Engine: L03
Transmission: 700R4
Axle/Gears: 10 Bolt 2.73 Open
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

Let us know how you like them.
Old 05-21-2019, 11:02 PM
  #42  
Supreme Member

iTrader: (4)
 
chazman's Avatar
 
Join Date: Dec 2001
Location: Chicagoland
Posts: 9,666
Received 546 Likes on 376 Posts
Car: 1989 IROC-Z. Original owner
Engine: LB9. Dual Cats. Big Cam
Transmission: World Class T-5
Axle/Gears: BW 3.45
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

Originally Posted by dagwood
I ordered a set of General G-MAX RS tires for the car tonight. I hope they're a good tire. It has a brand new set of Goodyear tires on it now, but they are going to go on my Dad's 1991 Trans Am convertible. The Goodyear's are a 225 60 16......so I'm putting 245 50 16's back on it. The Goodyear's are the stock size for the TA, and it needed tires anyways so it worked out good
I have a set on my yellow '85. Great tire!
Old 05-22-2019, 05:07 AM
  #43  
Member
iTrader: (2)
 
CKone's Avatar
 
Join Date: Apr 2016
Location: East Moline, IL
Posts: 461
Received 169 Likes on 134 Posts
Car: 88 T/A, 91 Formula, 94 Firehawk
Engine: 400 Pontiac, 5.0 TPI, 5.7 LT1
Transmission: 700R4, T5, T56
Axle/Gears: 4.10, 3.42, 3.42
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

Beautiful car man!!

Call me vanilla, but you can’t beat a plain white F body, love it! Whereabouts in IA are ya?
Old 05-22-2019, 05:08 AM
  #44  
Junior Member
 
socalkidd's Avatar
 
Join Date: Jan 2018
Location: Temecula, Ca
Posts: 18
Received 4 Likes on 3 Posts
Car: 1987 IROC Z28
Engine: 305 TPI
Transmission: T5
Axle/Gears: G92/3.27
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

Originally Posted by dagwood
So, I sold my 82 Z28 to another member on this board, (socalkidd) and he flew in last night and paid for my Z28 and got to hang out with him and got to shoot the bull over some tasty brews. Super great dude. Thanks Jim......you bought a real gem!

Anyways, my new car got delivered this afternoon. It's a 1990 IROC-Z with 42k miles. It has the 230hp TPI 305, 5 speed, G92, N10, and decal and stripe delete DX3. It also has gray leather interior in near perfect condition. I got it from a couple in their early 80's who bought it new in Houston, TX where it spent its life until 6 years ago when they moved to South Dakota. The car is in GREAT shape. Zero rust, the doors open and close like new, everything works, etc. The hood has been painted at some point and doesn't match very good, so I will give that a fresh paint job. The car has had a bra on it its entire life, too, so I am going to give the nose a new paint job as well. (Its in perfect shape, but the paint is yellowing) It has never been in an accident, and no paint work other than the hood.

I found the car on the thread that rayjr started about the 5 speed third gens for sale. Thanks again rayjr for making a great thread!

Anyways, I'll get it washed up tomorrow and take some pics. Here it is when it got dropped off this afternoon!

Thanks Bro.... Super excited about finally having the chance to get my high school car back! Had a great time hanging out with you and your lady.. I truly appreciate the hospitality.... but most of all the Coors Light! That really made the bad flight worth it!!!! She’s going to a great home....
Old 05-22-2019, 07:23 AM
  #45  
Supreme Member

Thread Starter
iTrader: (5)
 
dagwood's Avatar
 
Join Date: Oct 2002
Location: In the paint booth!
Posts: 2,656
Received 1,160 Likes on 653 Posts
Car: 1986 Camaro Drag Car
Engine: 383 on Ethanol
Transmission: Automatic
Axle/Gears: 3.90 Currie 9 inch
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

Originally Posted by CKone
Beautiful car man!!

Call me vanilla, but you can’t beat a plain white F body, love it! Whereabouts in IA are ya?

Thanks!

I'm in north central Iowa.....west of Fort Dodge about 20 miles if you know where that is
Old 05-22-2019, 10:09 AM
  #46  
Member
iTrader: (2)
 
CKone's Avatar
 
Join Date: Apr 2016
Location: East Moline, IL
Posts: 461
Received 169 Likes on 134 Posts
Car: 88 T/A, 91 Formula, 94 Firehawk
Engine: 400 Pontiac, 5.0 TPI, 5.7 LT1
Transmission: 700R4, T5, T56
Axle/Gears: 4.10, 3.42, 3.42
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

Well I heard of Ft Dodge simply because dirt track racer Scott Bloomquist is originally from there, but never been to the area. Down here in the Davenport area across the mighty Mississippi in IL. I have a brother in the Cedar Falls area, Iowa looks small on the map but huge when you start driving in it lol
Old 05-22-2019, 12:34 PM
  #47  
Supreme Member

Thread Starter
iTrader: (5)
 
dagwood's Avatar
 
Join Date: Oct 2002
Location: In the paint booth!
Posts: 2,656
Received 1,160 Likes on 653 Posts
Car: 1986 Camaro Drag Car
Engine: 383 on Ethanol
Transmission: Automatic
Axle/Gears: 3.90 Currie 9 inch
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

Took a couple pics outside in the sun.....





Old 05-22-2019, 12:36 PM
  #48  
Supreme Member

Thread Starter
iTrader: (5)
 
dagwood's Avatar
 
Join Date: Oct 2002
Location: In the paint booth!
Posts: 2,656
Received 1,160 Likes on 653 Posts
Car: 1986 Camaro Drag Car
Engine: 383 on Ethanol
Transmission: Automatic
Axle/Gears: 3.90 Currie 9 inch
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

The new tires are supposed to be here tomorrow, so I'm anxious to get the 245 50 16's on it. Should look a little better
Old 05-22-2019, 02:07 PM
  #49  
Member
iTrader: (2)
 
CKone's Avatar
 
Join Date: Apr 2016
Location: East Moline, IL
Posts: 461
Received 169 Likes on 134 Posts
Car: 88 T/A, 91 Formula, 94 Firehawk
Engine: 400 Pontiac, 5.0 TPI, 5.7 LT1
Transmission: 700R4, T5, T56
Axle/Gears: 4.10, 3.42, 3.42
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

Looks awesome! Almost has a sleeper effect without the decals, which might be what I like the most! And yes the correct tire size will do wonders, I almost think they were borderline the right size. Like the old Sony (I believe) radio ad for the din and a half radios with a fat guy in a speedo. “Just cause it fits doesn’t mean it looks right”
Old 05-25-2019, 11:06 PM
  #50  
Supreme Member

Thread Starter
iTrader: (5)
 
dagwood's Avatar
 
Join Date: Oct 2002
Location: In the paint booth!
Posts: 2,656
Received 1,160 Likes on 653 Posts
Car: 1986 Camaro Drag Car
Engine: 383 on Ethanol
Transmission: Automatic
Axle/Gears: 3.90 Currie 9 inch
Re: My new 1990 G92, N10, DX3, 5 speed IROC-Z

Well the 82 Z28 left today. Was sad to see it go.....



Quick Reply: My new 1990 G92, N10, DX3, 5 speed IROC-Z



All times are GMT -5. The time now is 10:32 PM.