Stall converter
#1
Junior Member
Thread Starter
Join Date: Jul 2018
Location: TN
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 GMC 1500 HIGH SIERRA
Engine: 305 bored 40 over
Transmission: 700 R4
Stall converter
Hey anybody know stall on factory converter on 1986 GMC 1500 700R4 Tranny? I just rebuilt 305 from block up. Bored 40 over. The cam I used was a comp cam the thumper lift 479/465. Duration intake 279 exhaust 297. Comp Cams recommend a 2000+ I purchased a 2000-2200 and was wanting to c if anynody else has used the same cam before and what stall they used. The idle is not real bad with the stock converter mostly in tight spots parking it will stall out and sluggish off the line. Any suggestions are welcome. Thanks
Last edited by 86GMC1500; 07-11-2018 at 06:41 PM. Reason: Spelling
Thread
Thread Starter
Forum
Replies
Last Post
wanab03ss
Transmissions and Drivetrain
2
12-21-2010 02:19 PM
rubbermanZ28
Organized Drag Racing and Autocross
3
08-17-2003 08:01 AM
ChrisFormula355
Organized Drag Racing and Autocross
9
08-07-2002 08:02 AM
burnoutrpm
Transmissions and Drivetrain
4
06-18-2002 11:56 PM