Baby ZZ4 Chevy 5.0 complete engine for sale
#1
Baby ZZ4 Chevy 5.0 complete engine for sale
Up for sale is a complete low mileage 5.0 chevy engine. It's out of a 1988 Camaro and comes complete from air clearner to oil pan. The only parts not included with the engine are the alternator and electric water pump but for and extra $300 I might let them both go with the march alt bracket as well. The engine includes the following....
Mildly ported and rebuilt ZZ4 Aluminum heads with brand new valve springs and a 3 angle valve job
ZZ4 Roller camshaft and all new timing gear and chain
LS7 lifters
K&N Air filter with Home made non drop base air cleaner
MSD 8.5mm Red super conductor wires and fresh R45TS ACDelco plugs
Edelbrock Performer RPM intake that has been gasket matched
Comp cams 1.6 roller tip rockers on the intake and Patriot Gold 1.5 roller rockers on the exhaust
TransDapt Throttle body adapter to mate a GM throttle body to a standard carb intake
Modded factory throttle body with flow matched 55lb injectors and new TPS and IAC valve
The factory starter is included and is only a few years old
The engine had all fresh gaskets (intake/head gasket etc.) besides the oil pan gasket but it's leak free
OPTIONAL
for an extra $300 I'll throw in the a March Peformance Alternator relocation bracket, Proform Electric water pump and a stock Alternator and March Performance aluminum underdrive pulley
The engine itself only has around 70k on it and had had it's oil changed RELIGOUSLY every 3000 miles with Mobil 1 10w30 synthetic
The price is FIRM because I could honestly part the thing out and get what I'm asking for it but I'd rather sell it as a package deal. The motor runs VERY strong and is still in the car so you can hear it run, if you have cash in hand I'll even let you test drive it with me in the car ofcourse,lol.
You can reach me at 92eight eight97 82one four
Mildly ported and rebuilt ZZ4 Aluminum heads with brand new valve springs and a 3 angle valve job
ZZ4 Roller camshaft and all new timing gear and chain
LS7 lifters
K&N Air filter with Home made non drop base air cleaner
MSD 8.5mm Red super conductor wires and fresh R45TS ACDelco plugs
Edelbrock Performer RPM intake that has been gasket matched
Comp cams 1.6 roller tip rockers on the intake and Patriot Gold 1.5 roller rockers on the exhaust
TransDapt Throttle body adapter to mate a GM throttle body to a standard carb intake
Modded factory throttle body with flow matched 55lb injectors and new TPS and IAC valve
The factory starter is included and is only a few years old
The engine had all fresh gaskets (intake/head gasket etc.) besides the oil pan gasket but it's leak free
OPTIONAL
for an extra $300 I'll throw in the a March Peformance Alternator relocation bracket, Proform Electric water pump and a stock Alternator and March Performance aluminum underdrive pulley
The engine itself only has around 70k on it and had had it's oil changed RELIGOUSLY every 3000 miles with Mobil 1 10w30 synthetic
The price is FIRM because I could honestly part the thing out and get what I'm asking for it but I'd rather sell it as a package deal. The motor runs VERY strong and is still in the car so you can hear it run, if you have cash in hand I'll even let you test drive it with me in the car ofcourse,lol.
You can reach me at 92eight eight97 82one four
Last edited by robertfrank; 11-20-2012 at 02:54 PM.
#5
Supreme Member
iTrader: (2)
Join Date: Nov 2000
Location: California
Posts: 1,295
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro Convertible
Engine: 355
Transmission: 700r4
Re: Baby ZZ4 Chevy 5.0 complete engine for sale
let me know if youre looking to separate. Specifically the heads with rockers.
#7
Supreme Member
iTrader: (2)
Join Date: Nov 2000
Location: California
Posts: 1,295
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro Convertible
Engine: 355
Transmission: 700r4
Re: Baby ZZ4 Chevy 5.0 complete engine for sale
It seems like a great engine, but no bueno out here for the Carb (because of "CARB" strangely enough)... But Im down for the heads and rockers. Would even consider the long block, but getting it out here would cost far too much.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
06-13-2021 01:13 PM