Distributor cause a code 43?
Thread Starter
Senior Member
Joined: Nov 2001
Posts: 517
Likes: 0
From: Plattsburgh,NY
Car: 93 Mustang GT
Engine: 5.0
Transmission: T-5
Distributor cause a code 43?
My friend recently rebuilt his engine replaced the distributor also since it had frozen up in his 90 IROC 350. He got one out of a 87 Monte Carlo SS (LG4). Now he has a persistent code 43 and it runs like crap! It will idle ok for awhile, then start idling like crap. It spits and sputters when driving it. The timing is at 6* initial so thats not the prob. He has already replaced the knock sensor too...with no luck! Are the distributors different?? He was told they are same. Any help is great!!
Supreme Member
Joined: Jul 2001
Posts: 1,219
Likes: 0
From: Panama City, FL, USA
the parts inside could be bad and is the connection from the wiring harness going to the dist good? Mine had a code 40 something when I think the module was bad. I guess thats the name its the part where the connector comes off the harness, its what plugs into it. I'd check that
Thread
Thread Starter
Forum
Replies
Last Post
amargari
Engine/Drivetrain/Suspension Parts for Sale
6
Nov 10, 2015 02:09 PM
