Simple StealthRam question
Thread Starter
Senior Member
Joined: Jul 2002
Posts: 583
Likes: 1
From: under the hood
Simple StealthRam question
Hello everyone. I have a question for people that installed StealthRam's in their Fbodies (or people that know this info).
What do I need to buy to adapt my stock TPI fuel lines to the StealthRam's fuel rails ? I've searched for this info everywhere and I all I found was D Flynn's list of things he used, but that says he cut the fuel lines somewhere and I didn't do that. So what did you guys that installed the StealthRam do for fuel lines ?
What do I need to buy to adapt my stock TPI fuel lines to the StealthRam's fuel rails ? I've searched for this info everywhere and I all I found was D Flynn's list of things he used, but that says he cut the fuel lines somewhere and I didn't do that. So what did you guys that installed the StealthRam do for fuel lines ?
Junior Member
Joined: Feb 2003
Posts: 66
Likes: 0
Supreme Member
Joined: Mar 2001
Posts: 6,577
Likes: 0
From: Portland, OR www.cascadecrew.org
Car: 1990 Camaro RS
Engine: Juiced 5.0 TBI - 300rwhp
Transmission: T5
Axle/Gears: 3.42 Eaton Posi, 10 Bolt
i know holley sells a fuel rail kit for the stealth ram, you may have to buy that. i don't know if the stockers will work on the HSR or not.
TGO Supporter
Joined: Jul 2001
Posts: 404
Likes: 1
From: Evansville, IN USA
Car: '89 GMC Pickup
Engine: 383 SBC Stealth Ram
Transmission: 700R4/VIG 3200
3' of steel braided hose, cut in two equal lenths.
AER-FCA0603 Aeroquip Stainless Steel Braided Hose $15.95
4 straight -6 AN fittings
AER-FCM1012 Aeroquip AQP Fittings $5.95 4 $23.80
2 Earl's adapters, 14&16mm
EAR-9894DBH $7.99
EAR-9894DBJ $7.99
Parts Total: $55.73
These are the Summit numbers from my email confirmation when I ordered mine.
Removed the rubber lines and attached these Earls adapters to the stock braided lines, screwed on the '6an hose fittings and lines, and then to the rear of the HSR fuel rail and FPR.
AER-FCA0603 Aeroquip Stainless Steel Braided Hose $15.95
4 straight -6 AN fittings
AER-FCM1012 Aeroquip AQP Fittings $5.95 4 $23.80
2 Earl's adapters, 14&16mm
EAR-9894DBH $7.99
EAR-9894DBJ $7.99
Parts Total: $55.73
These are the Summit numbers from my email confirmation when I ordered mine.
Removed the rubber lines and attached these Earls adapters to the stock braided lines, screwed on the '6an hose fittings and lines, and then to the rear of the HSR fuel rail and FPR.
Last edited by SMasterson; May 12, 2003 at 10:53 PM.
Thread
Thread Starter
Forum
Replies
Last Post
355tpipickup
Alternative Port EFI Intakes
2
Aug 26, 2015 04:08 PM